User manual SONY MX-T2726

[. . . ] Refer to them whenever you call upon your Sony dealer regarding this product. ___________ This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. ENERGY STAR® ia a U. S. As an ENERGY STAR® Partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. This appliance is classified as a CLASS 1 LASER product. [. . . ] It does not appear for decks that support MDLP mode. · When set to "On", "LP:" is recorded as the track name, so the number of characters that can be input to an MD is reduced. In addition, when you copy a track name with "LP:" added, "LP:" is automatically added to the copied track name. If you divide an "LP:" track using the Divide function, "LP:" is also added to the latter track. OVER indication Recording level can be adjusted within a range of ­ to +12 dB. (Continued) 23 Recording on MDs 7 8 9 Press MENU/NO. To start recording, do the procedure starting from step 7 in "Recording on an MD Manually" on page 21. You can also change the recording level by using the remote Z During recording pause, press REC LEVEL +/­ repeatedly. Marking Track Numbers While Recording You can mark track numbers either manually or automatically. By marking track numbers at specific points, you can quickly locate the points later using the AMS Function or Editing Functions. z Note that the level cannot go above +12 dB. MENU/NO AMS REC r Note You cannot adjust the recording level while playing an MD. Marking track numbers manually You can mark track numbers at any time while recording on an MD. Press REC r at the place you want to add a track mark while recording. Marking track numbers automatically (Track Marking Function) The deck adds track marks differently in the following cases: · When recording from CDs or MDs with "OPT" selected by the INPUT button (when recording from a CD or MD connected through the DIGITAL OPTICAL IN connector): The deck marks track numbers automatically according to the information contained in the source being recorded. However, the deck may not automatically mark track numbers when recording from some CD players and multi disc players. · In all other cases: If "T. Mark LSyn" is selected in Setup Menu, the deck marks a new track number whenever the signal drops to the specified level or below for about 1. 5 seconds or longer, then rises to a specified level. 24 Recording on MDs Set "T. Mark" in Setup Menu to "LSyn" or "Off" as follows: 1 2 3 Press MENU/NO twice to display "Setup Menu" while the deck is stopped. Turn AMS to select "T. Mark LSyn, " then press AMS. Note When Music Synchro-Recording, the Smart Space Function and the Auto Cut Function turn on automatically regardless of their setting ("On" or "Off"). 1 Do steps 1 to 5 in "Recording on an MD Manually" on page 21. The deck changes to recording pause. 26 Recording on MDs 2 Start playing the program source you want to record. The most recent 6 seconds of audio data is stored in the buffer memory. Press AMS (or T. REC) to start Time Machine Recording. Recording of the program source starts with the audio data stored in the buffer memory. Fading In and Out (Fader) Z You can gradually increase the recording level at the beginning of a recording (fade-in recording) or gradually decrease the recording level at the end of a recording (fade-out recording). This function is convenient when, for example, you don't want the track cut off abruptly when the disc reaches to its end. 3 To stop Time Machine Recording Press p. Note The deck starts storing audio data when the deck is in recording pause and you start playing the program source. With less than 6 seconds of playing of the program source and audio data stored in the buffer memory, Time Machine Recording starts with less than 6 seconds of audio data. < > ^ Fade-in recording During recording pause, press FADER at the position where you want to start fade-in recording. Z flashes and the deck performs the fade-in recording until the counter reaches "0. 0s. " Fade-out recording During recording, press FADER at the position where you want to start fade-out recording. z flashes and the deck performs the fade-out recording until the counter reaches "0. 0s. " The deck changes to recording pause when fade-out recording finishes. z You can set the duration of fade-in and fade-out recording independently 1 While the deck is stopped, press MENU/NO twice to display "Setup Menu. " 2 To set duration of fade-in recording: Turn AMS to select "F. in, " then press AMS. To set duration of fade-out recording: Turn AMS to select "F. out, " then press AMS. [. . . ] / Set the deck in a stable place, and repeat the recording procedure. The inserted MD is dirty (with smudges, fingerprints, etc. ), scratched, or not up to standards. / Replace the disc, and repeat the recording procedure. C13/Rec Error C13/Read Error C14/Toc Error The deck could not read the TOC of the MD properly. The deck could not read the TOC of the MD properly. [. . . ]