User manual SONY MZ-B10

[. . . ] Caution The use of optical instruments with this product will increase eye hazard. CAUTION -- INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM Certain countries may regulate disposal of the battery used to power this product. The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area). For customers who purchased this product in the USA Owner's Record The serial number is located at the inside of the battery compartment and the model number is located at the front of the lid. [. . . ] Playing a track in group play Start playback from the top group to the end, and then stop after playback of the tracks which do not belong to a group (Group - -). Or > until the group you want to add a track to appears in the display. To add a track that is playing to a group, stop or pause playing the track first, and then do the procedure from step 2. â· You can set the recorder to always create a new group without pressing the GROUP button. Do the procedure of "Selecting the play mode (Single Play/Repeat Play)" (page 27) and select " : Normal" in step 3. The group play starts from the next track. Or > and select "RepeatOFF" or "RepeatON", and then press MENU/ENTER to enter the selection. Using the group function when playing The recorder can operate various playback with a disc which has group setting. In group mode, the recorder treats all tracks without group settings as belonging to the last group on the disc. The last group is indicated in the display window on the recorder as "Group --". Within a group, the tracks appear in their order on the disc, not their order within the group. Repeat play for the selected group (Group Repeat Play) Select "RepeatON" in step 2. With this function, you can assign existing tracks or groups to a new group, and also you can assign a track that currently belongs to no group to an existing group. You can create a maximum of 99 groups on a disc. It is not possible to make a group setting if the tracks, groups and disc name on a disc contain more than the maximum number of characters that can be stored. If the desired tracks or groups are not consecutive, you must move them to make them consecutive before you can register them ("Moving recorded tracks (Move)", page 30). While the recorder is stopped, press MENU/ENTER. Or > until "EDIT" appears in the display, and then press MENU/ENTER. Or > until " : Set" appears in the display, and then press MENU/ENTER The track number of the first track ("STR") appears in the display. Assigning tracks 1 to 3 to a new group Assigning group 1 and group 2 to a new group Registration of non-consecutive tracks is not possible (for example, track 3 and tracks 7 and 8 (Group 1) cannot be registered to a new group). Track numbers appear according to their order on the disc, not their order within the group. Or > until the number of the desired first track appears in the display, and then press MENU/ ENTER. [. . . ] Do not expose the recorder to physical shock, nor disrupt power supply. There is no more space for new data when you are editing the MD. You tried to record or edit a write-protected track that was recorded on other device. This recorder supports DSP TYPE-S, a specification for high-level Sony MiniDisc decks equipped with digital signal processors (DSP). [. . . ]