User manual SONY MZ-B50

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Caution The use of optical instruments with this product will increase eye hazard. The serial number is located on the inside of the battery compartment lid and the model number is located at the top and bottom. Record the serial number in the space provided below. [. . . ] To change a special track mark to a regular track mark After the completion of recording, erase "TT" at the begining of the track name or change the name of the track. When you erase a track mark, the date, time, and name assigned to the mark are also erased. You cannot erase a track mark that has been written between a track recorded in stereo and a track recorded in monaural. If you try to erase such a track mark, "SORRY" appears in the display. â· You cannot erase a track mark that has been written between a track recorded through a digital connection and a track recorded through an analog connection. If you try to erase such a track mark, "SORRY" appears in the display. To erase a small section of a track Add track marks at the beginning and the end of the part you want to erase, then erase the part. Note that once a recording has been erased, you cannot retrieve it. Be sure to verify the contents of the disc you want to erase. Note that once a recording has been erased, you cannot retrieve it. Be sure to verify the contents of the track you want to erase. Play the disc you want to erase, verify its contents, and then press xSTOP. While the recorder is stopped, press ERASE. When erasing is complete, "BLANKDISC" appears in the display. While playing the track you want to erase, press ERASE. " and "PushENTER" appear alternately in the display and the recorder plays the selected track repeatedly. The track is erased and the next track starts to play. All the tracks after the one erased are automatically renumbered. You can change the order of the recorded tracks. Example Move track C from the third to the second track. You can name tracks during playback, discs during stop, and both during recording. Each name can be as long as 200 letters. [. . . ] Premastered MDs are recorded with location addresses corresponding to each music selection. Recordable MDs are manufactured with a "User TOC Area" to contain the order of the music. the TOC (Table of Contents) system is similar to the "directory management system" of floppy disks. In other words, starting and ending addresses for all music tracks recorded on the disc are stored in this area. [. . . ]