User manual SONY MZ-E10

[. . . ] Listening to selected tracks only (Bookmark play) You can bookmark tracks on a disc and play them only. Using the group function The group function is provided to allow playback of discs with group settings. The group function is convenient for playback of MDs on which several albums or CD singles have been recorded in MDLP (LP2/LP4 ) mode. Repeat play for the selected group play mode (Group Repeat Play) You can vary the virtual sound to create different acoustics, or modify the sound to suit your taste and store it for later use. [. . . ] ⷠThe disc stopped playing before reaching the last track. B Open the lid, or while the player is stopped, press and hold the jog lever for 2 seconds or more to start playing from the first track. The player is placed where it receives continuous vibration. A very short track may cause sound to skip. Strong magnetism from a television or other device causing interference. B Move the player away from the source of strong magnetism. B Because of the nature of the compression method used in LP4 mode, noise may be output on very rare occasions during playback of sound recorded in this mode. During playback, the "3-color info-LED" or display on the remote control does not turn on. When using digital pitch control, you may hear noise or an echo in the playback. Slide the jog lever repeatedly until "OPTION" appears in the display, and then press the jog lever. Slide the jog lever repeatedly until "BEEP" appears in the display, and then press the jog lever. Slide the jog lever repeatedly until "BEEP OFF" appears in the display, and then press the jog lever to enter the selection. Audio playing system MiniDisc digital audio system Laser diode properties Material: GaAlAs Wavelength: = 790 nm Emission duration: continuous Laser output: less than 44. 6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture. 1 kHz Coding ATRAC (Adaptive TRansform Acoustic Coding) ATRAC3: LP2/LP4 Modulation system EFM (Eight to Fourteen Modulation) Number of channels 2 stereo channels 1 monaural channel Frequency response 20 to 20, 000 Hz ± 3 dB Outputs Headphones/earphones: dedicated headphone/ remote control jack, maximum output level 5 mW + 5 mW load impedance 16 Power requirements Lithium-ion rechargeable battery (Built-in: LIP3WMB, 3. 9 oz) (including the built-in rechargeable battery) Supplied accessories Headphones/earphones with a remote control (1) Battery charging stand (1) AC power adaptor (for the supplied battery charging stand) (1) Headphone adaptor (1) Carrying pouch (1) US and foreign patents licensed from Dolby Laboratories. Design and specifications are subject to change without notice. Once memorized, "PERSONAL" appears in the display, the settings are recalled, and applied whenever the disc is inserted. The following settings can be stored: · Bookmark This procedure can be done by the remote control. Each time you slide the jog lever, the indication moves from "TIME:01" to "TIME:99" (1 minute to 99 minutes) in one- minute intervals. Select "NORMAL" in step 4 above . You can check the battery condition through the battery indicator on the remote control and the "3-color info-LED" on the player while using the player. [. . . ] ) Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information about the accessories in your country. The battery life may be shorter than that specified, depending on the operating conditions, the temperature of the location. When removing the battery, use sharp-tipped tweezers. [. . . ]