User manual SONY MZ-E310

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] In group mode, the player treats all tracks without group settings as belonging to the last group on the disc. the last group is indicated in the display as "GP --". Within a group, the tracks appear in their order on the disc, not their order within the group. Playback when group mode is on: Playback of the selected group starts with the first track in the group, and stops with the last track in the group. Disc Group 1 Track number Group 2 Track number Group 3 Track number When playing a disc with group settings, the group skip function allows you to jump from the currently playing group to any other group on the MD. The group skip function can be used at any time during playback, regardless of whether the player is in group mode on or not. Insert a disc which has group settings into the player, and then play the disc. " " and "GP ON" light up in the display and group mode is turned on. Playback stops at the end of the last track in the selected group. For details on selecting another group, see "Selecting and playing specific groups (Group Skip Function)" (page 13). When group mode is on: Disc Group 1 Track number Group 2 Track number Group 3 Track number If your MD recorder (MD deck or recording MD Walkman) has a function for editing disc names, you can use it to register groups even if your recorder does not have the group function. Make sure you enter the text string exactly as described below. The group function will not work if you enter the text string incorrectly. Insert a disc which has group settings into the player, and then play the disc. Or N> repeatedly until the name or number of the desired group appears. The player starts playing from the first track in the group. Change the disc name to the following by using your MD recorder: 0;[Disc name] // [First track of group 1 ]A B [Last track of group 1] ; [Name of group 1 ] // B C [First track of group 2] - [Last track of group 2 ] ; B [Name of group 2] // . When there is a group name (Example: AAA) Group name When there is no group name Disc name Track number Group name Separator between groups Hyphen placed between the first track and the last track Separator between track number and group name ) Set the following groups for the disc named "Collections": Group name for tracks 1-7: If no operation is performed within 5 seconds in step 3, group skip mode is canceled. Up to 99* groups can be registered on a single MD. The characters ";", "/", and "­" can be used in a group name. You can register the same group name twice or more on the same MD. You can specify a group without entering a group name (C) for it. [. . . ] The player is placed where it receives continuous vibration. A very short track may cause sound to skip. , Try not to create a track under one second long. Strong magnetism from a television or such device is interfering with operation. [. . . ]