User manual SONY MZ-E501

[. . . ] Digital sound preset factory settings The digital sound preset factory settings are as follows: · Enter a track number. ) The 3 Color Info-LED on the player lights up orange, and the player enter group skip mode. Assemble the battery charging stand and charge the supplied rechargeable battery before using it for the first time. You can also power the player with a dry battery. [. . . ] The battery indication will show a low charge when the player goes forward or backwards or is used at extremely low temperatures. Do not operate the player when you place it on the battery charging stand or during the charging. If you do so, it may cause the player to malfunction or prevent the battery from charging. Using the group function D The MZ-E501 can be used with a disc which has group settings. The group function allows you to play the tracks on an MD in groups. This is convenient for playing many tracks or tracks which are recorded in MDLP (LP2/LP4) mode. Knowing the track name and playing time E press DISPLAY on the remote control. Each time you press DISPLAY, the display changes the indications as the follows: Using the player with a dry battery Attach the supplied battery case to the player, and then insert one LR6 (size AA) battery with correct polarity. For more details, see "Turning off the beep sound. Or > N on the player during pause, the player resumes playback. If you turn and hold the control towards . or N> on the remote control (or hold down . Or > N on the player) during pause, you can fast forward/rewind without listening to the playback sound. Once you open the lid, the point to start playback changes to the beginning of the first track. This is a disc with settings that organaize tracks into groups, and which allows those groups to be selected. A Track number Track number The number of total tracks in Group The number of total tracks Track number Turning off the beep sound H You can turn off the beep sound in the headphones. Listening to tracks in a specific group (Group Mode Playback) 1 Insert a disc which has group settings Into the player, and then play the disc. 2 Insert the MD with the label side facing up, and press the lid down to close. When removing the disc, make sure to press x first, and then press OPEN. Repeatedly until "GROUP" flashes, and then press x on the remote control. [. . . ] You can select various play modes using the PLAYMODE and RPT/ENT buttons on the remote control. Pressing SOUND for 2 seconds or more again changes the player to the treble-setting mode. Normal play (the LED lights up continuously) Group mode* (the LED lights up continuously) Group skip mode* (the LED lights for about 5 seconds) Each time you press this button, the play mode changes as follows: * For more details, see "Using the group function. all the tracks are played in random order. [. . . ]