User manual SONY MZ-E62

[. . . ] The player gives out mechanical noise while operating, which is caused by the powersaving system of the player. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. Never use the player where it will be subjected to extremes of light, temperature, moisture or vibration. Find the beginning of the current track Find the beginning of the previous tracks Press PLAYMODE while the player is playing an MD. [. . . ] â· Dust on the lens may prevent the unit from operating properly. Be sure to close the disc compartment lid after inserting or ejecting an MD. To know the track name and time Press DISPLAY on the remote control while the player is playing an MD. Each time you press DISPLAY, the display changes as follows. Approximately 12 hours of playback can be expected with one LR6 (size AA) alkaline battery (not supplied). If the sound becomes distorted when emphasizing bass, turn down the volume. Display window while playing back For details, see "To know the track name and time". Track name*3 or elapsed time of the track being played The player does not work or works poorly. â· You tried to play with no disc in the player ("NO DISC" flashes on the remote control). (If you press any of the operation buttons on the player, "HOLD" flashes on the remote control. ) b Slide HOLD against the direction of the arrow to release the hold function. B Take the MD out and leave the player's lid open for several hours until the moisture evaporates. â· The dry battery is weak ("LOW BATT" flashes on the remote control). The player cannot read the disc (it's scratched or dirty) ("DISC ERR" flashes on the remote control). While operating, the player received a mechanical shock, too much static, abnormal power voltage caused by lightning etc. 2 Leave the player for about 30 seconds. 3 Insert the battery into the battery compartment The MD is not played normally. â· The player is set to the repeat mode (" " is displayed on the remote control). B Press PLAYMODE repeatedly until " " disappears, then start playing. An MD is not played from the first track. â· Disc playing stopped before it came to the last track. Repeatedly or eject and reinsert the MD once to go back to the beginning of the disc, and restart playing after checking the track number in the display. [. . . ] Or > N on the player during pause (X), the player resumes playback. Or > N on the player (or press and hold the control towards . Or N/> on the remote control) during pause (X), you can fast forward/rewind without listening to the playback sound. *2 Once you open the lid, the point to start playback will change to the beginning of the first track. [. . . ]