User manual SONY MZ-E810SP

[. . . ] Operating Instructions Charge the supplied rechargeable battery before using it for the first time. Listening an MD with the supplied speakers 1 Attach the player to the batterycharging case with speakers. Insert the player so that it engages with the connector in the battery-charging case. Push the player in the direction of the arrow in the illustration. [. . . ] Level (+10 dB) You can select from among seven levels. AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears. Measured with the power save function on (see "Preserving battery power"). measured in accordance with the JEITA (Japan Electronics and Information Technology Industries Association) standard (using a Sony MDW-series Mini-disc). With a fully charged battery When using a Sony LR6 (SG) "STAMINA" alkaline dry battery (produced in Japan). Repeat play for the selected group play mode (Group Repeat Play) During playback, press and hold DISPLAY for 2 seconds or more. Slide the jog lever repeatedly until "AVLS" appears in the display, and then press the jog lever. Slide the jog lever repeatedly until "AVLS ON" appears in the display, and then press the jog lever to enter the selection. The battery life may be shorter than that specified, depending on the temperature of the location, the operating conditions, and the type of battery being used. Repeat steps 3 and 4 to adjust the level for each frequency. This may cause the player to malfunction. Do not place the player in the following places: -- An extremely hot place (over +60°C (+140°F)) -- A place exposed to direct sunlight or near a heater -- In a car with the windows rolled up (especially in the summer) -- In a damp place such as a bathroom -- Near a source of electromagnetic fields such as a magnet, speaker, or TV -- In a dusty place Using the group function The group function is provided to allow playback of discs with group settings. The group function is convenient for playback of MDs on which several albums or CD singles have been recorded in MDLP (LP2/LP4 ) mode. During playback in the selected group play mode, press and hold P MODE/ for 2 seconds or more. playback repeats in the respective group mode. Play mode Repeat play of tracks within a group Repeat shuffle play of tracks within a group Repeat play for group program Slide the jog lever repeatedly until "PowerMode" appears in the display, and then press the jog lever. Slide the jog lever repeatedly until "PowerSave" appears in the display, and then press the jog lever to enter the selection. B Other operations Viewing the track name and playing time in the display on the remote control You can check the track or disc name, track number, the elapsed playing time of the current track, the number of the tracks recorded on the MD, the group name, and the total number of tracks in a group. You can operate the player without a rechargeable battery or a dry battery. ⷠThe player is not firmly attached to the battery-charging case with speakers. B Attach the player firmly to the battery-charging case with speakers. B Depending on the track being played when you activated the surround effects, you may hear some distortion in the sound. [. . . ] This procedure can be done by the remote control. Slide the jog lever repeatedly until "BACKLIGHT" appears in the display, and then press the jog lever. Slide the jog lever repeatedly to select one of the following settings: Display Setting AUTO The backlight lights when you operate the player or the remote control, and automatically turns off when no operation is made for a while (factory setting). ON OFF The backlight lights while the player is operating. [. . . ]