User manual SONY MZ-G755

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] Press MENU, press <SELECT, repeatedly until "BEEP" flashes in the display, and then press ENTER. Press <SELECT, repeatedly until "BEEP OFF" flashes in the display, and then press ENTER. To turn on the beep sound Select "BEEP ON" in step 2. If you do not want the effect of the Mega Bass function on your recording or the output from the externally connected equipment, set "BASS" to "BASS OFF" (page 37). ⷠWhen recording to an externally connected equipment, press VOL + repeatedly to raise the volume level to maximum, which is optimum for recording to an externally connected equipment. If, however, this level produces distortion in the recording, press VOL ­ several times to lower the level (to that shown in the illustration below). Various way to use the radio presetting radio stations automatically You can automatically preset radio stations whose reception is good. Once a station is preset, you can tune it in at any time simply by selecting the preset number. The station frequencies are stored in memory in order of low to high, starting with preset number 1. If the automatic presetting function fails to find the station that you want because of poor reception, do the steps below to manually store the radio station to a preset number. Press and hold the jog lever (MODE) until "M" and the preset number flash in the display. Flip the jog lever towards F+ or F­ repeatedly until the desired preset number flashes in the display. Press and hold the jog lever (MODE) until a long beep sounds in the headphones/earphones. You can simply tune the station by selecting the preset number. ) repeatedly until the desired preset number appear on the display. You can change the tuning interval and frequency range to suit the geographical region. Flip the jog lever towards F+ repeatedly until the desired region code appears in the display. Each time you flip the jog lever, the region code indicated by A changes as follows: A J U E Region Japan FM (MHz)1) 76. Press RADIO OFF (x) to turn off the radio once, and then press RADIO ON/BAND to turn on the radio. The new setting is stored in memory and is not affected even when you turn off the radio. The battery indication does not appear in the display when you use the radio. ⷠAfter changing the tuning interval, you need to preset radio station. [. . . ] ⷠYou tried to erase a track mark to combine tracks the recorder cannot combine (a track recorded in different recording mode, or a track recorded through a digital connection and an analog connection, for example). ⷠYou tried to press X, T MARK or REC MODE during synchrorecording. tEMP OVER (­ ­ ­ ­ ­ ) · Heat has built up in the recorder. There is no more space for new data when you are editing the MD. [. . . ]