User manual SONY MZ-N910

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] Depending on the group settings, the operating conditions, and the disc settings, you may not be able to select certain indications or the indications may appear different. Indication: A(selected item)/B/C B A (selected item) -- Track (LapTime) number 1 Remain Track number Group name C Elapsed time Remaining time of the current track Remaining time after the current location in the group The backlight of the display window of the remote control can be set to remain on or off. This function can be set with the remote control only. While the recorder is stopped, enter the menu and select "OPTION" "BACKLIGHT". Setting The backlight lights when you operate the recorder or the remote control, and automatically turns off when no operation is made for a few seconds. When labeling a track When labeling a disc Turn the volume control repeatedly to select a letter and press the jog lever to enter. The selected letter stops flashing and the cursor moves to the next input position. You can adjust the contrast of the display window on the recorder. This function can be set with the recorder only. The buttons and control used for character input and their functions are listed below. functions To move the cursor to the left or right. Press the jog lever for 2 seconds or more (NX/ENT). While the recorder is stopped, enter the menu and select "OPTION" "CONTRAST". Turn the jog dial to adjust the contrast, and then press the jog dial to enter the selection. To switch between capital letters, small letters, and numbers/ marks. You cannot adjust the contrast with the remote control, nor can you adjust the contrast of the display on the remote control. Repeat step 3 and enter all characters of the label name. Moving a track in a disc with group setting While playing the track you want to move enter the menu and select "EDIT" - "Move" - " : Move". When moving a track out of a group, skip this step. When moving a track into a different group, slide the jog lever until the destination group appears in the display, and then press the jog lever. Re-labeling You can re-label recordings by following the procedure of "Labeling (Name)" (page 65). Slide the jog lever repeatedly until the number of the destination track (within a group when moving into a different group) appears in the display, and then press to enter the selection. [. . . ] OpenMG employs a method whereby three copies of a song can be checked out simultaneously, while the fourth copy is maintained as a master on your PC. Electronic Music Distribution (EMD) service EMD is a website that distributes music files which are available for purchase. MP3 MP3, which stands for MPEG-1 Audio Layer3, is a standard for audio file compression determined by the Motion Picture Experts Group, an ISO (International Organization for Standardization) working group. It enables compression of audio files to about 1/10 of the data size of a standard compact disc. [. . . ]