User manual SONY MZ-NH1

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] You cannot erase a track mark on a track that You cannot erase a track mark on a track that You cannot combine tracks recorded in different recording mode. The moved four-second interval plays back repeatedly. Press the 5-way control key (jog dial on the remote control) to enter the dividing point. You can use the Speed Control function during the Divide Rehearsal function. This allows you to reduce the playback speed (page 51) to carry out the division more accurately. To add track marks while recording (except while synchro-recording) Press T MARK on the recorder at the point you want to add a track mark. You can use Time Mark to add track marks automatically at specified intervals (except while digital recording) (page 39). While playing the track with the track mark you want to erase, press X to pause. Find the track mark by pressing the 5way control key towards FR slightly. For example, to erase the third track mark, find the beginning of the third track. The track mark is erased and the two tracks are combined. When using a disc in Hi-MD mode, you can use the Format function to restore a disc to the condition it was in at the time of purchase. You can use this function only when using a disc in Hi-MD mode. NOTE: Transfer authorization of the transferred tracks can be restored by inserting the disc into the recorder and connecting the recorder to the computer. You can then use the disc again in either MD mode or Hi-MD mode. When a track mark is erased when you combine two tracks, the recording date and title of the second track changes to those of the first track. Note When you erase a track mark between the two consecutive tracks that are assigned into different groups, the second track is re-assigned into the group containing the first track. In addition, if you combine a track that is assigned to a group with a track that is not assigned to a group (two consecutive tracks), the second track takes the same registration setting as the first track. If you think a disc contains such data, insert the disc into the recorder and connect the recorder to the computer to check the contents of the disc. If you format a disc, the transferred tracks on the disc will also be erased and the number of transfer authorizations for those tracks will be decreased by one. The operation mode set in the "Disc Mode" menu is applied to a blank 60/74/80-minute standard disc used on the recorder even if a different operation mode was selected in the SonicStage software or a different operation mode appeared on the display after the disc was formatted by the SonicStage software. While the recorder is stopped, enter the menu and select "Edit" "Format". [. . . ] restrictions on audio content High-quality digital audio content is widely available through music distribution services on the Internet. To protect the copyrights of its holders from unauthorized distribution, some audio content is distributed with certain restrictions on recording and playback. For example, the playback period or playback count for the data may be limited. Please refer to the following steps if you encounter a problem while using SonicStage/MD Simple Burner. [. . . ]