User manual SONY MZ-NH600

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears. Turn the jog dial until "AVLS On" appears in the display, and then press NENT to enter the selection. When you try to turn the volume too high, "AVLS NO VOLUME OPERATION" appears in the display. Turn the jog dial until "Simple" or "Advanced" appears in the display, and then press NENT to enter the selection. Turning off the beep sound You can turn off/on the beep sound. The recorder is factory set to automatically store settings for each disc. the recorder automatically stores the settings for a disc and retrieves them whenever the disc is inserted. The following setting can be stored: · Turn the jog dial until "Beep Off" appears in the display, and then press NENT to enter the selection. To turn on the beep sound Select "Beep On" in step 2. Turn the jog dial until "On" appears in the display, and then press NENT to enter the selection. To set the recorder so that disc settings are not stored Select "Off" in step 2. Insert the disc whose information is to be erased and verify its contents. "Disc Memory" appears when the disc with its setting stored is inserted. Settings stored afterwards will replace the settings with the lowest frequency of use among the 64. The numbers of discs that can be stored depend on the numbers of tracks recorded on the discs. More tracks recorded per disc means fewer discs can be stored. If you try to erase the disc information of a disc that have never been stored, "NO DISC MEMORY" appears in the display for a few seconds. Starting the playback quickly (Quick Mode) After pressing the playback button or cueing to the track, the playback can start quickly. Turn the jog dial until "Quick On" appears in the display, and then press NENT to enter the selection. To switch back to the normal setting Selects "Quick Off" in step 2. When the quick mode is set to "Quick On", The power remains on within the recorder even when nothing appears in the display. If no recorder operation (including opening or closing of the lid) occurs for an hour, the power in the recorder automatically turns off. [. . . ] restrictions on audio content High-quality digital audio content is widely available through music distribution services on the Internet. To protect the copyrights of its holders from unauthorized distribution, some audio content is distributed with certain restrictions on recording and playback. For example, the playback period or playback count for the data may be limited. Please refer to the following steps if you encounter a problem while using SonicStage/MD Simple Burner. [. . . ]