User manual SONY MZ-R410

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] To label a disc If a disc is already recorded, follow the procedures from step 2 while the recorder is stopped. If a disc is new, start recording and label a disc while recording. If you label a disc with group settings, turn group mode on (page 23). Repeatedly until "EDIT" flashes in the display, and then press ENTER. Repeatedly until the following item appears in the display, and then press ENTER. When labeling a track "T: Name" When labeling a group "G: Name" When labeling a disc "D: Name" The cursor flashes and the track, group, or disc is ready to be labeled. The selected letter stops flashing and the cursor moves to the next input position. The buttons used for character input and their functions are listed below: Operations Press VOL +, ­. Capital letters, small letters and numbers/ marks To select a character Press > or . To enter a letter To enter a name To insert a blank space to type in a new letter To delete a letter and move back all following letters to the left To cancel labeling Press ENTER. Repeat step 5 and enter all characters of the label name. When the recording is stopped while labeling a track, a group, or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically. ⷠ"LP:" is automatically added at the beginning of the track name for tracks recorded in MDLP mode (page 21). Insert a disc and do the following operations: To relabel a track Start playing a track you want to relabel, and change a track name during playback operation. To relabel a group Turn group mode on (page 23) and start playing or recording a track within the group you want to relabel, and change the group name while playing or recording operations. To relabel a disc If the disc is already recorded, follow the procedures from step 2 while the recorder is stopped. If you relabel a disc with group settings, turn group mode on (page 23). Follow steps 3 to 4 of "Labeling recordings" (page 35) to display a track, group, or disc name. Follow steps 5 to 7 of "Labeling recordings" (page 35), and then keep pressing ENTER for 2 seconds or more. Do the following procedure to register tracks or groups as a new group. The tracks or groups must, however, be sequential. If the desired tracks or groups are not consecutive, you must move them to make them consecutive before you can register them ("Moving recorded tracks", page 38). [. . . ] 6 oz) the recorder only US and foreign patents licensed from Dolby Laboratories. Design and specifications are subject to change without notice. Optical Cable POC-15B, POC-15AB, POC-DA12SP Stereo Headphones/earphones* MDR-EX70LP, MDR-72LP, MDR-A34LP Active Speakers SRS-Z500 Recordable MDs MDW-series Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information about the accessories in your country. [. . . ]