User manual SONY MZ-R50

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. The use of optical instruments with this product will increase eye hazard. Here are some of the capabilities and features you'll discover with the new MiniDisc Recorder. Shock-resistant memory -- Offsets up to 40 seconds of optical read errors. [. . . ] The track is erased from the MD and the remaining tracks are renumbered. Follow steps 1 and 2 to display the label of the track or MD. Enter a new character over the one you want to change, then press TITLE/ENTER. You cannot relabel premastered MDs or label MDs that have not been recorded. The recorder is able to display, but cannot label using, Japanese "Katakana" characters. You can use the recorder on house current or as follows. ­ dry batteries (not supplied) It is preferable to use the recorder on house current when recording for a long time. Before using the supplied LIP-8 lithium ion rechargeable battery for the first time, charge it in the recorder. You can use the recorder while charging. Be sure to use the supplied AC power adaptor. Insert the LIP-8 into the recorder and close the lid. Insert two LR6 (size AA) dry batteries (not supplied). 2) When you record, use a fully charged rechargeable battery. 3) Recording time may differ according to the alkaline batteries. When the dry batteries or rechargeable battery are weak, b flashing or "LOW BATT" appears in the display. Do not put any foreign objects in the DC IN 6 V jack. Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in many areas. It can also be potentially dangerous to play your recorder at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations. Use house current, lithium ion rechargeable battery, two LR6 (size AA) batteries, or car battery. For use in your house: Use the AC power adaptor supplied with this recorder. [. . . ] Recordable MDs Recordable MDs, which use magnetooptical (MO) technology, can be recorded again and again. The laser inside the recorder applies heat to the MD, demagnetizing the magnetic layer of the MD. The recorder then applies a magnetic field to the layer. This magnetic field corresponds exactly to the audio signals generated by the connected source. [. . . ]