User manual SONY MZ-R500PC
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY MZ-R500PC. We hope that this SONY MZ-R500PC user guide will be useful to you.
Lastmanuals help download the user guide SONY MZ-R500PC.
Manual abstract: user guide SONY MZ-R500PC
Detailed instructions for use are in the User's Guide.
[. . . ] 3-223-746-13(1)
Portable MiniDisc Recorder
Operating Instructions
MZ-R500/R500PC/R500DPC
© 2000 Sony Corporation
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] "Erase?" and "ENTER" appear alternately in the display. The track is erased and the next track starts to play. All the tracks after the one erased are automatically renumbered.
3
Erasing tracks
To erase a track
Note that once a recording has been erased, you cannot retrieve it. Make sure of the track you are erasing.
x
To erase a part of a track Add track marks at the beginning and the end of the part you want to erase, then erase the part (page 26).
To erase the whole disc
You can quickly erase all the tracks and data of the MD at the same time. Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the disc you want to erase.
x
>MENU.
ENTER >MENU. ENTER
1
While playing the track you want to erase, press ENTER, press >MENU. repeatedly until "EDIT" flashes in the display, and then press ENTER again. " " and "Name" flash in the display, and the recorder plays the selected track repeatedly.
1
While the recorder is stopped, press ENTER, press >MENU. repeatedly until "EDIT" flashes in the display, and then press ENTER again. " " and "Name" flash in the display.
continued
25-GB
2
Press >MENU. repeatedly until "Erase" flashes in the display, and then press ENTER. "Erase?" and "ENTER" appear alternately in the display. "Edit" flashes in the display, and all the tracks will be erased. When erasing is complete, "BLANK" appears in the display.
To add track marks while recording Press T MARK at the point you want to add a track mark.
Note
You cannot add track marks during synchrorecording.
3
Erasing a track mark
When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark. The track numbers will change as follows.
Erase a track mark
Adding a track mark
You can add track marks so that the part after the new track mark is counted as a new track. The track numbers will increase as follows.
Add a track mark
1 1
2 2
3
4 3
1 1 2
2 3
3 4
4 5
Track numbers decrease Track numbers increase T MARK X T MARK
.
1
1
While playing or pausing an MD, press T MARK at the point you want to mark. "MK ON" appears in the display, and a track mark is added. The track number will increase by one.
While playing the track with the track mark you want to erase, press X to pause.
26-GB
2
Find the track mark by pressing . For example, to erase the third track mark, find the beginning of the third track. "00:00" appears in the display. [. . . ] in stereo
Revolutions
350 rpm to 2, 800 rpm (CLV)
Battery operation time
See "Battery life" (page 8) Approx. 83. 0 × 27. 8 × 75. 8 mm (w/h/d) (33/8 × 11/8 × 3 in. ) without projections.
Error correction
ACIRC (Advanced Cross Interleave Reed Solomon Code)
Dimensions Mass
Sampling frequency
44. 1 kHz
Approx. 113 g (4. 0 oz) the recorder only
Sampling rate converter
Input: 32 kHz/44. 1 kHz/48 kHz
Supplied accessories
AC power adaptor (European, Chinese and Argentine models only) (1) Headphones/earphones (1) Optical cable (European, Chinese and Argentine models only) (1) US and foreign patents licensed from Dolby Laboratories. Design and specifications are subject to change without notice.
Coding
ATRAC (Adaptive TRansform Acoustic Coding) ATRAC3 - LP2 ATRAC3 - LP4
Modulation system
EFM (Eight to Fourteen Modulation)
Number of channels
2 stereo channels 1 monaural channel
Frequency response
20 to 20, 000 Hz ± 3 dB
Optional accessories
Optical Cable POC-15B, POC-15AB, POC-DA12SP Line Cable RK-G129, RK-G136 Stereo Headphones* MDR-D77, MDR-D55 Active Speakers SRS-Z500 Recordable MDs MDW-series AC power adaptor AC-E30HG Your dealer may not handle some of the above listed accessories. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY MZ-R500PC Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service. Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY MZ-R500PC will begin.