User manual SONY MZ-R501 annexe 1

[. . . ] Easy operation with the new remote control -- Keep the main unit in your pocket and operate the MiniDisc player through the shuttle dial on the remote control; the LCD diplays track information, playback mode as well as battery condition. Vertical jog dial -- You can select your desired tracks directly by simply rotating a dial. Digital synchro-recording -- The recorder automatically starts and pauses recording in sync with operation on the connected digital equipment. Sampling rate converter -- This unit enables you to record programs from digital equipment using other sampling rates, such as a BS tuner or DAT deck. [. . . ] The Mega Bass does not function or will be cancelled when the LINE OUT jack is connected with a line cable. You can edit your recordings by adding/ erasing track marks or labeling tracks and MDs. Do not move or jog the recorder while "Toc Edit"* is flashing in the display. Before editing tracks, close the tab on the side of the MD. You can quickly erase all the tracks and data of the MD at the same time. Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the disc you want to erase. Note that once a recording has been erased, you cannot retrieve it. Press ERASE while playing the track you want to erase. " and "Push Erase" appear in the display alternately, and the recorder plays the selected track repeatedly. The track is erased from the MD and the remaining tracks are renumbered. You can also move the track by pressing the jog dial in step 3. Rotate the jog dial to select a character, and press the jog dial to enter the selected character. Switch between capital letters, small letters, and marks/numbers. To remove the AC power adaptor from the wall outlet, grasp the adaptor plug itself; never pull the cord. For use in the car: Use the CPA-8 or CPA-9 car connecting pack and the DCC-E260 car battery cord (not supplied). Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use. This will allow you to hear outside sounds and to be considerate of the people around you. Do not place the cartridge where it will be subject to light, extreme temperatures, moisture or dust. Clean the recorder casing with a soft cloth slightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene as it may mar the finish of the casing. [. . . ] Please ask the dealer for detailed information about the accessories in your country. US and foreign patents licensed from Dolby Laboratories Licensing Corporation. Design and specifications are subject to change without notice. * Whether you should plug the headphones directly to 2/REMOTE on the main unit or to a remote control, use only headphones with stereo mini plugs. [. . . ]