User manual SONY MZ-R909

[. . . ] 28 35 39 50 55 69 2 PLAYMODE 42 44 55 3 RPT/ENT repeat / enter 44 4 SOUND 45 1 2 3 4 5 6 7 8 9 q; Display window T MARK button END SEARCH button Battery compartment REC (record) switch HOLD switch (at the rear) Terminals for attaching dry battery case. While charging the rechargeable battery, this indication shows the charging condition. 7 SYNC (synchro-recording) indication Lights up while synchro-recording. 8 Level meter Shows the level of the MD being played. [. . . ] The sound settings are saved and the playback display appears again. When you use the Digital Sound Preset, the sound may break or become distorted depending on the settings or the track. In this case, change the settings of the sound quality. Changing to another Digital Sound Preset during a recording operation will not affect the quality of recorded sound. On the recorder 1 Press the jog dial, turn the dial until "SOUND" flashes in the display, and then press the dial again. 2 Press the jog dial, turn the dial until "SOUND1" or "SOUND2" flashes in the display, and then press the dial again. 1 While playing, press the jog dial, turn the dial until "SOUND" flashes in the display, and then press the dial again. Select "T" or "B" pressing x (to move the cursor downward) or X (to move the cursor upward). You can change the adjust the item in which the cursor is flashing. 1 While the recorder is stopped, playing, or play-paused, press the jog dial. 2 Turn the jog dial until "PERSONAL" flashes in the display, and then press the dial. 1 Press DISPLAY on the remote control for 2 seconds or more during playback. 2 Turn the control on the remote control towards . Or N> until "SPEED" flashes in the display, and then press x on the remote control. "+" shows the normal speed and the cursor shows the playback speed you are selecting. "S" appears in the display when the speed is changed. You cannot change playback speed with the recorder. All settings will be lost when you remove the disc from the recorder (except when the settings of the disc has been stored to the Personal Disc Memory). 1 While the recorder is stopped, playing, or play-paused, press DISPLAY for 2 seconds or more. Or N> until "PERSONAL" flashes in the display, and then press x. Insert the disc whose information is to be erased and verify its contents. Do steps 1 and 2, then turn the jog dial on the recorder or turn the control towards . [. . . ] MENU : You pressed a key on the remote control while selecting a menu on the recorder. NAME FULL : You tried to enter more than 200 letters to label a single track or disc. You tried to enter a total of more than 1700 letters for track or disc names. NO COPY : You tried to make a copy from a disc that is protected by the Serial Copy Management System. [. . . ]