User manual SONY MZ-R910

[. . . ] Terminals for attaching dry battery case DC IN 3V jack GROUP/CANCEL button OPEN button 5-way contorl key · 7 Level meter Shows the level of the MD being played. While charging the rechargeable battery, this indication shows the charging condition. For moving the cursor and entering selected items (during text entry and other settings). Qa Jog dial (MENU/ENTER) Press to enter the menu, turn to select, and then press to enter. [. . . ] The number of titles that can be stored on a disc depends on the number of characters that are input for track names, group names, and disc name. About the character palette During operations on the recorder, characters can be selected from the character palette in the display. Since only a part of the character palette is visible on the display, use the 5-way control key to move the cursor and enter characters. "NAME FULL" appears when you try to enter more than 1, 700 characters on a disc. Enter a shorter name for the track, group, or disc, or set the "LP Stamp" setting to "Stamp OFF" so that "LP:" is not be added at the beginning of the track name. ⷠWhen labeling a disc which has been recorded using the group function, make sure group mode is on in order to prevent the group management information from being overwitten by mistake. ⷠIf you enter the symbol "//" between the characters in disc names such as "abc//def, " you may be unable to use the group function. You can name tracks, groups and discs using the recorder's character palette. To label a track: Start playing or recording the track you want to label, and then label the track while the recorder is playing or recording. To label a group: Turn the group mode on (page 97) and start playing or recording the track within the group you want to label, and then label the group while the recorder is playing or recording. To label a disc: Label a disc while the recorder is stopped or recording. If you label a disc with group settings, turn the group mode on (page 97). Numbers of characters you can input Track, group, or disc name: Approx. 200 each (all available characters are mixed). Numbers of characters you can input in a disc 120 titles of about 10 characters each (a maximum of about 1, 700 letters) · japanese katakana characters Approx. 60 titles of about 10 characters each (a maximum of about 800 letters) 3 Turn the jog dial until "EDIT" flashes in the display, and then press to enter. 4 Turn the dial until the following item appears in the display, and then press to enter. When labeling a track: " : Name" : Name" When labeling a group: " When labeling a disc: " : Name" The cursor flashes in the letter input area and the track, group, or disc is ready to be labeled. The cursor shifts from the letter input area to the character palette. 6 Select a letter with the 5-way control key and press N to enter. The selected letter appears in the letter input area and the cursor moves to the next input position. The buttons used for character input and their functions are listed below. [. . . ] NAME FULL : You tried to enter more than 200 letters to label a single track or disc. You tried to enter a total of more than 1700 letters for track or disc names. NO COPY : You tried to make a copy from a disc that is protected by the Serial Copy Management System. You cannot make copies from a digitally connected source which was itself recorded using the digital connection. [. . . ]