User manual SONY MZ-RH1

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and do not place lighted candles on the apparatus. [. . . ] When you set a playback speed other than 0 %, "SC" appears to the left of the time display in the display window of the remote. When using Speed Control, you may hear noise or an echo in the playback. The Virtual Surround, 6-Band Equalizer and Dynamic Normalizer functions are disabled while Speed Control is being used. Editing-related menus can be used on either the recorder or the remote. Before editing Make sure not to move or jog the recorder or disconnect the power source while editing or "SystemFILE WRITING" is displayed. If you do, the data edited up to that point may not be recorded to the disc, or data on the disc may be damaged. Changes the track order on the disc ( page 56). Changes the group order on the disc ( page 56). Can be used when the track you want to erase is played. Group Erase Erases a group and all tracks in a group. Can be used when a track in the group you want to erase is played. Can be used while the recorder is stopped. * Appears only for discs used in Hi-MD mode. * Appears only for discs used in Hi-MD mode When erasing a track or a group Note that once a recorded item has been erased, it cannot be recovered. Make sure to confirm the contents of the selected item before erasing it. When erasing tracks that have been transferred from the computer When you try to erase tracks that have been transferred from the computer, "TRACK FROM PC" and "ERASE OK?If you erased tracks that have been transferred from the computer, the transfer authorization of the tracks will be as follows. If the tracks were transferred in Hi-MD mode, the transfer authorization of the tracks are restored automatically when you insert the disc into the recorder and then connect the recorder to the computer. If you do not want to lose the transfer authorization, restore the authorization by transferring the tracks to the computer again before erasing them. To erase a part of a track Add track marks at the beginning and the end of the part you want to erase, then erase the part ( page 47). You cannot use the "Erase" function to delete nonaudio data (for example, text data or image data) on a disc used in Hi-MD mode. When all tracks in a group are deleted using the "Track Erase" function, that group is automatically deleted from the disc. [. . . ] To edit these tracks, first transfer them into the computer, and then edit them on the computer. About the DSP TYPE-S for ATRAC/ATRAC3 This recorder supports DSP TYPE-S, a specification for high-level Sony MiniDisc decks equipped with digital signal processors (DSP). This specification allows the recorder to produce high-quality sound from tracks recorded in MDLP mode. Since it retains DSP TYPE-R support, the recorder produces superior results during playback in SP (normal stereo) mode. [. . . ]