User manual SONY MZ-DH10P

[. . . ] This warranty is valid only in the United States. 2-590-278-11 (4) Operating Instructions MZ-DH10P Player Operation Software Operation page 10 page 70 Portable MD Player "WALKMAN" is a registered trademark of Sony Corporation to represent Headphone Stereo products. is a trademark of Sony Corporation. Hi-MD Walkman Printed in Malaysia © 2005 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. [. . . ] Connect the large connector of the USB cable to a USB jack on your computer and the small connector to the USB connector on the USB cradle. Storing Non-Audio Data Connecting to Your Computer to USB jack dedicated USB cable (supplied) to USB connector Continued 47 3 Place the player on the USB cradle and push it in firmly. The OPR lamp lights up in orange. 3 Disconnect the dedicated USB cable. While pressing the buttons on the sides of the plug, push the plug inward, and then pull it outward to disconnect the dedicated USB cable from the player. You can connect the dedicated USB cable directly to the player. To remove the player from the USB cradle 1 Follow steps 1 and 2 of "To disconnect the dedicated USB cable from the USB cradle or the player" ( page 48). 2 Press RELEASE on the USB cradle to remove the player ( page 15). When removing the disc from the player 1 Follow steps 1 and 2 of "To disconnect the dedicated USB cable from the USB cradle or the player" ( page 48). 2 Remove the disc from the player. To disconnect the dedicated USB cable from the USB cradle or the player 1 Make sure that the OPR lamp on the player is not flashing rapidly. Make sure that the OPR lamp on the player is not flashing rapidly again. 48 Notes · Nothing appears in the player's display when it is connected to your computer. · When the OPR lamp is flashing rapidly, do not remote the dedicated USB cable. · If you use the player connected to the computer, it is recommended that you insert a fully charged rechargeable battery as a precaution against power failures, disconnection of the dedicated USB cable or other unforeseen occurrences. We do not assure the results should there be a misoperation, transfer failures, or destruction of audio data caused by unforeseen occurrences. · If you disconnect the dedicated USB cable from the player and want to reconnect it, make sure to wait at least 2 seconds before connecting it again. · Make sure to place the player at a stable, vibration-free place during recording. · The player is not recognized by your computer during recording or playing. · The system may malfunction if your computer changes to system suspend, sleep, or hibernation mode while connecting to the player. Make sure to disable any changes to suspend, sleep, or hibernation mode. · Make sure not to connect the player and the computer through a USB hub. · It is not possible to charge the rechargeable battery in the player while using the bus power connection. · We do not ensure trouble-free operation on all computers that satisfy the system requirements. Copying Still images to Your Computer Storing Non-Audio Data Connecting to Your Computer Image files recorded with the player are grouped as folders in the disc. Example when using Windows XP folder for still images The steps of copying still images to your computer vary depending on your OS. When using Windows 98SE/2000/Me 1 2 3 Insert a disc in Hi-MD mode, and then connect to your computer ( page 47). The contents in the disc appear. Continued 49 4 5 6 Double-click [DCIM]. Double-click the folder where the desired still image saved in. Drag and drop the image files into the [My Documents] folder. The image files are copied to the "My Documents" folder. 2 Click [Copy pictures to a folder on my computer using Microsoft Scanner and Camera Wizard], then click [OK]. The "Scanner and Camera Wizard" screen appears. [. . . ] If an error message has appeared, press the [Enter] key. If there is no message, the installation is still in progress. The progress bar on the display The installation is progressing normally. The installation may take 30 minutes or more, depending on your CD drive or system environment. 95 Using a MD Walkman connected to the computer Problem Your computer does not recognize the MD Walkman. [. . . ]