User manual SONY NAS-Z200IR

[. . . ] Wireless Network Audio System NAS-Z200DiR/Z200iR Operating Instructions WARNING To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. [. . . ] Tips You can set the Sleep Timer even when a function is selected. Press OPTIONS during any function to enter the Options menu, select [Sleep Timer], and then select the time interval. If you set both Sleep Timer and Play Timer at the same time, the Sleep Timer takes priority. //ENTER Note If you perform the following operations before the Sleep Timer goes off, the Sleep Timer resets. Select [Settings] from the Home menu and perform [Common Setting] ­ [System Reset]. Using the Sleep Timer You can set the Sleep Timer so that the unit enters standby mode automatically after a certain period of time (Sleep Timer function). This function operates even if the clock is not set. 1 2 3 Select [Settings] from the Home menu. Select the time interval. You can select the interval from [Off]*1, [10 minutes], [30 minutes], [60 minutes], or [90 minutes]. *1 Factory setting After the selected time elapses, the unit enters standby mode automatically. GB Using the Play Timer You can set the Play Timer to start playing a radio program, an iPod, a USB device, or a CD at a specified time (Play Timer function). Make sure you have set the clock. To cancel the procedure Select [Cancel] in step 8 or press HOME. To go back to the previous display Press BACK. Notes The Play Timer is erased if you disconnect the power cord of the main unit. If the unit is already turned on at the preset starting time, the Play Timer will not be activated. The Play Timer may not be activated depending on the status of the connected iPod. The ending time for the Play Timer cannot be the same as the starting time. 1 2 3 4 5 Prepare the sound source. Select the sound source (radio, iPod, USB device, or CD), and then press +/­ to adjust the volume. Operations Select [Settings] from the Home menu. Select [On]. The Play Timer setting display appears. Set the starting time. Press / to change the hour and press ENTER. Do the same operation to set the minute. Press and hold / to change the parameter sequentially. 6 7 8 Set the ending time. Do the same operation as step 5 to set the end time. Select the source ([Tuner], [iPod], [USB], or, [CD]) you want to play. When "Confirm "Play Timer" settings. " appears, select [OK]. GB Viewing the unit's information You can view the various settings. To view the settings, do the following operation. Item Firmware Version Device ID Description You can check the firmware version of the unit. You can check the device ID that is used for the Internet radio. To cancel the procedure Press HOME. HOME BACK // ENTER To go back to the previous display Press BACK. 1 2 3 Select [Settings] from the Home menu. Select the item you want to view. Item My Name Network Information Description This is the name that is set for this unit and is displayed on the server. Connection Setting Network name (SSID) Security Setting IP Address Setting IP Address/Subnet mask Default Gateway DNS Server Setting DNS 1/DNS 2 Proxy Setting You can check the MAC address of the unit. MAC Address GB Setting the standby mode You can select the power status of the unit while it is in standby mode. Quick Start-up HOME BACK // ENTER 1 2 3 Select [Settings] from the Home menu. Select [Power Save] or [Quick Startup]. Power Save With this setting, the unit is fast to respond when you turn on the unit, but the power consumption in standby mode is high. When the unit is turned off, it saves information regarding the computer track that was last playing (when using the Home Network function) or the Internet radio station that was last on (when using the Internet Radio function). The unit then resumes playing the track or the radio station when it is next turned on. [. . . ] US and foreign patents licensed from Dolby Laboratories. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Microsoft, Windows, Windows Vista, Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. [. . . ]