User manual SONY NETAV V1.6 QUICK START

[. . . ] You must enable use of a port for LocationFree TV (typically 5021). 1 Typically your Internet Service Provider (ISP) assigns an IP address to you when you sign up for service. However, this IP address is "dynamic, " meaning that it may change. Most ISPs offer, for a monthly premium, a "fixed IP address" that is assigned only to you. [. . . ] 2 In the Settings menu, go to Base station > NetAV Settings > Dynamic DNS. Enter the following information in the appropriate field. A User ID B Password C URL to update DNS information Enter the Username you registered in DynDNS Enter the Password you registered in DynDNS If your registered Host/Domain name is YourName. dnsalias. com, enter http://members. dyndns. org/nic/update?hostname= YourName. dnsalias. com Enter http://checkip. dyndns. org:8245/ Select the Set button D URL to detect IP address E Set button A B C D E Settings > Base station > NetAV Settings > Dynamic DNS 3 Select the Back button and again select Dynamic DNS. Check that the data is showing as entered. If the data has changed, repeat step 2 on this page. Then check the Current status field as follows: A Success Failure Updating Your Dynamic DNS is successfully configured. The system is automatically checking IP addresses currently assigned to your base station. Wait at least 10 minutes before going to Step 4 on page 9. The Dynamic DNS configuration failed or communication to the server failed. Try repeating Steps 1-3 on pages 5 to 8. The update process may take as long as 10 minutes at the DDNS provider. Wait 10 minutes before trying again The system is still trying to correctly configure. Try waiting a few more minutes; the current status will soon indicate "success" or "failure. " If the Current status field does not change, repeat Step 2 on page 6. 8 Step 4 Configure LocationFree TV for Your Home Router In this section you will specify or "lock" an IP address from your router to the LocationFree Base Station. 1 Go to Settings > Base station > Internet Connections > LAN (DHCP/Manual IP address settings). Make sure the box next to Automatic IP address configuration (DHCP) is checked and write down on a piece of paper the information in all of the fields. Check this check box Settings > Base station > Internet Connection > LAN (DHCP/Manual IP address settings) 2 Uncheck the box next to Automatic IP address configuration (DHCP). The information in the fields will clear, which releases the "automatic" IP settings. 3 Enter again the information you wrote down in step 1 --with one exception. [. . . ] See your router manual for details. 11 Step 6a Connect NetAV from a Hotspot Finding a signal corresponding to a hotspot 1 Go to Settings > Monitor > and set On the go to Wireless A. A Settings > Monitor 2 Go to Settings > Monitor > On the go-Wireless > Settings > Public Wireless Access. A list of available wireless access points is displayed. If nothing appears in 10 seconds, select Search/Update A. [. . . ]