User manual SONY HANDYCAM NEX-3A/B DATASHEET

[. . . ] Other versions may not comply with FCC technical regulations. If you have any questions about this product: Visit: http://www. sony. com/rollysupport Contact: Sony Customer Information Service Center at 1-800-222-SONY (7669). Write: Sony Customer Information Service Center 12451 Gateway Blvd. , Fort Myers, FL 33913 The number below is for the FCC related matters only. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has a very low RF energy level that is deemed to comply with FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and legs). WARNING CAUTION Danger of explosion if battery is incorrectly replaced. [. . . ] You can initialize the player to the default settings. The stored music and motion data are retained. You can format the built-in flash memory of the player. The stored music and motion data are all erased. Before formatting the player, check the contents, and save any important music and motion data on your computer using Rolly Choreographer. Make sure that you format the player using this "Format Rolly" on Rolly Choreographer. Never format the player using Windows Explorer. If you do so, the player will not be recognized by the computer. Using the wake-up timer When you set the wake-up timer on, disconnect the USB cable from the player, and leave the Power switch to ON. If the player is playing music at the preset time, the wake-up function does not work. To check whether the wake-up timer is set to on or not, set the Power switch to ON and hold the Play button down for about 2 seconds. When it is set to on, the Play-button indicator flashes 3 times in green. Hint When the player is connected to a computer and Rolly Choreographer is running, the clock function of the player is synchronized with the clock of the computer. Device Information Initialize Rolly Settings Format Rolly Enjoying Music and Motion Note Notes The track used for the wake-up timer is remembered by the order of the track, not by the name of the track. Depending on the Bluetooth device used, a Bluetooth connection is automatically established after pairing has been completed successfully. Note A Bluetooth connection is cleared in the following cases. The paired Bluetooth device or its Bluetooth function is turned off. The player or the Bluetooth function of the Bluetooth device is set to sleep mode. The Bluetooth connection is disconnected. You must connect the player and the paired Bluetooth device again as described on the previous page. 1 Activate the Bluetooth function of the paired Bluetooth device so that the device can be connected with the player. For details about the operations of the paired Bluetooth device, refer to the operations manual supplied with the Bluetooth device. Set the Power switch of the player to Click the Play button of the player. . Listening to Music via Bluetooth Communication The flashing intervals of the Bluetooth indicator change as follows, and the connection between the player and the paired Bluetooth device is established. Flashes once every 2 seconds (The connection is being processed. ) Flashes once every 5 seconds (The connection has been established. ) When the connection is established, the player opens its arms once. If the connection has not been established, perform the connecting operation on the paired Bluetooth device. For details about the operation of the paired Bluetooth device, refer to the operations manual supplied with the Bluetooth device. Listening to Music When the connection between the player and the paired Bluetooth device is established, you can listen to music played on the paired Bluetooth device through the speakers of the player, by operating either the player or the paired Bluetooth device. Notes When Bluetooth devices other than the player are connected to the paired Bluetooth device, the music played on the Bluetooth device may sound only intermittently through the speakers of the player. If this happens, disconnect the other Bluetooth devices from the paired Bluetooth device. If you play movies on the paired Bluetooth device, there may be a lag in audio playback, due to the performance of Bluetooth function. If you play music near the range of maximum volume level, the speakers vibrate, and the case of the player vibrates, too. [. . . ] You do not need wires to get connected as you do with a USB connection, and you do not need to place the devices face to face as you do with wireless infrared technology. You can use the technology with one Bluetooth device in your bag or pocket. Bluetooth wireless technology is a global standard supported by thousands of companies. These companies produce products that meet the global standard. Around microwave ovens that are in use Locations where other electromagnetic waves occur Effects of other devices Bluetooth devices and wireless LAN (IEEE 802. 11b/g) use the same frequency band (2. 4 GHz). [. . . ]