User manual SONY NEX-3NL

[. . . ] via a wireless access point Launch “Image App” on the smartphone/tablet. Touch the smartphone/tablet to [ ] of the camera. If you perform steps 1 and 2 while performing single image playback on the camera, you can easily transfer the image to the smartphone/tablet. Connecting manually Operation on the camera 1 SEE REVERSE SIDE    2 3 Connecting the camera to a smartphone/tablet  Press camera [ON/OFF] button.  Press [Wi-Fi]. Make sure the Wi-Fi connection lamp  is lit blue.  Lit blue: The Wi-Fi connection is on standby  Blinking blue: Sending/receiving data through the Wi-Fi connection Select [New Connection]. Select [Remote Shooting]. The SSID and password are displayed. 1 Installing the smartphone/tablet app “Panasonic Image App” Operation on the smartphone/tablet 1 2 3 4 Connect the smartphone/tablet to a network. AndroidTM Select “Google PlayTM Store”. You can select the setting you used before from [History Connection]. [. . . ] Please refer to “Operating Instructions for advanced features” (PDF) for details. To change the connection method, press [DISP. ]. (Such as [WPS Connection], [Via Network], etc. ) Please refer to “Operating Instructions for advanced features” (PDF) for details.  SSID refers to the name that is used to identify a network over a wireless LAN connection. If the SSID matches for both devices, transmission is possible.  WPS (Wi-Fi Protected SetupTM) refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices. You can record/playback by using the smartphone/tablet. You can also save pictures in the camera on the smartphone/tablet. Operation on the smartphone/tablet 4 5 6 ( The following is an example of when Android is being used. Screens vary depending on your OS. ) 7 Image App iOS Select “App Store SM”.  The service may not be able to be used properly depending on the type of smartphone/tablet being used. For compatible devices, see the following support site.  Motion pictures cannot be displayed on the TV.  Example: Connecting with [WPS (Push-Button)]. Preparing folders for receiving images Prepare folders for receiving images on the PC before sending a picture to the PC.  Create a PC user account [account name (up to 254 characters) and password (up to 32 characters)] consisting of alphanumeric characters. An attempt to create a receive folder may fail if the account includes non-alphanumeric characters. Send Images While Recording Example: Sending to the PC Select the PC you want to connect to and the destination folder.  When using “PHOTOfunSTUDIO” 1 Install “PHOTOfunSTUDIO” to the PC.  For details on hardware requirements and installation, refer to “Operating Instructions for advanced features” (PDF). Select [WPS (Push-Button)]. Every time you take a picture, the picture can be automatically sent to a smartphone/tablet or PC.  Prepare folders for receiving images on the PC before sending a picture to the PC. The pictures are sent automatically after taking them. Example:  Folders sorted by the sent date are created in the specified folder, and pictures are saved in those folders.  If the screen for a user account and password entry appears, enter the one you set on your PC. 2 Create a folder that receives images with “PHOTOfunSTUDIO”.  To create the folder automatically, select [Auto-create]. To specify a folder, create a new folder, or set a password to the folder, select [Create manually]. [. . . ]  If the screen for a user account and password entry appears, enter the one you set on your PC. 2 Create a folder that receives images with “PHOTOfunSTUDIO”.  To create the folder automatically, select [Auto-create]. To specify a folder, create a new folder, or set a password to the folder, select [Create manually].  For details, refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).  When not using “PHOTOfunSTUDIO” (For Windows) Supported OS: Windows XP/Windows Vista/Windows 7/Windows 8 Example: Windows 7 1 Select a folder you intend to use for receiving, then right-click. [. . . ]