User manual SONY HANDYCAM NEX-5A/B DATASHEET

[. . . ] notes · Before setting the alarm, make sure to set the clock (see "Setting the clock and date"). To use both sleep timer and alarm You can fall asleep to the radio and also be awakened by the radio or buzzer alarm at the preset time. When the battery becomes weak, "E" indicator appears in the display. In the event of a power interruption when the battery is weak, current time and alarm functions will be initialized. [. . . ] If ALARM TIME SET A (or B) is turned, "OFF" appears in the display for about 0. If a second alarm sounds during a first (or the snooze function is active), the second alarm takes priority. CLOCK, DST, and TIME ZONE are unavailable while the alarm sounds or snooze function is turned on. The ALARM VOLUME setting works together with the beep sound volume. The alarm function works as usual at the beginning and end day of the daylight saving time (summer time). While the Automatic DST/Summer Time adjustment is set (excerpt for East European model), as a result, if the alarm is set at a time skipped when the daylight saving time (summer time) begins, the alarm is skipped, or if the alarm is set at a time overlapped when the daylight saving time (summer time) ends, the alarm sounds twice. If the same alarm time is set for both alarm (ALARM A and B), the ALARM A takes priority. Outlet, remove the screw that secures the battery compartment at the bottom of the unit using a screwdriver, and remove the battery compartment. A-1) Insert a new battery in the battery compartment with the e side facing up. To remove the battery from the battery compartment, push it out from the side marked PUSH. Insert the battery compartment back into the unit and secure it with the screw. When setting the current time, time changes rapidly by 1 minute-increments up to 10 minutes, and then by 10 minute-increments. While setting the clock, you must perform each step within 65 seconds, or the clock setting mode will be cancelled. The sound turns off but will automatically come on again after about 10 minutes. Each time you press SNOOZE/DATE/SLEEP OFF, the snooze time changes as follows: This unit is preset to the current date and time at the factory, and is powered by the back up battery. All you need to do the first time is just plug it in and select your time zone. Press SNOOZE/DATE/SLEEP OFF once for the date, and within about 3 seconds press it again for the year. The display shows the date or year for about 3 seconds and then changes back to the current time. If you connect the AC plug to AC outlet while this unit is powered from the backup power source, the current date and time appears in the following order. (It is same as when the unit is powered on after the power failure. The display shows the snooze time for about 4 seconds and returns to show the current time. When you press SNOOZE/DATE/SLEEP OFF after the current time appears, the snooze time starts from 10 minutes again. [. . . ] But following functions are different: · When the alarm sound is set to RADIO, it will change to BUZZER automatically. If the power returns while the alarm sounds, the alarm sounds continuously for about 60 minutes when the power returns. The alarm buzzes for about one minute, stops temporarily, and will buzz again after about five minutes if neither SNOOZE/DATE/SLEEP OFF or RADIO OFF/ALARM RESET are pressed while the alarm is buzzing. If the alarm buzzes and stops (either automatically after 1 minute or by pressing SNOOZE/DATE/ SLEEP OFF) five times, the alarm is automatically reset in the case of a power interruption. [. . . ]