User manual SONY HANDYCAM NEX-5RK/S

[. . . ] Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The quantity of refrigerant used in your appliance is indicated on the type plate on the inside of the appliance. u Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because otherwise there will be vibratory noise!u Dispose of packaging material (see 4. 5) . u Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustableheight feet (A) and using a spirit level. Note u Clean the appliance (see 6. 2) . If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance. u Always see to good ventilation at the installation site. WARNING Risk of fire due to short circuit!If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit. u Stand the appliance so that it is not touched by connectors or main cables. u Do not plug the appliance or any others into sockets located near the rear of the appliance. 4. 3 Changing over the door hinge* You can change over the door hinges if necessary. Make sure that the following tools are at hand: q Torx® 25 4 Putting into operation q Torx® 15 q Supplied open-ended wrench q If necessary, a second person to assist with installation CAUTION Risk of injury if the door tips!u Set down the door carefully. 4. 4 Insertion into a row of kitchen units Fig. 3 (6) shines and the child lock symbol Fig. 3 (2) to select the brightness function. 3 (9) goes out and the brightness symbol Fig. u To confirm: Briefly press the SuperFrost button Fig. 3 (1). u Using the setting button Fig. 3 (2), select either "off" or the brightness wanted. The more display fields of the temperature display that light up, the brighter it is. If no field is lit up, it means "off". u To confirm: Press the SuperFrost button Fig. w The brightness is adjusted to the new value. u To deactivate the setting mode: Press the On/Off button -oru Wait for 5 minutes. [. . . ] Although the running time is increased as a result, energy is saved. u This is normal in energy-saving models. u The compressor runs for longer in order to rapidly cool the food. A LED on the bottom rear of the appliance (at the compressor) flashes regularly every 15 seconds*. [. . . ]