User manual SONY HANDYCAM NEX-F3K/S

[. . . ] Do not expose the batteries to excessive heat such as sunshine, fire or the like. Declaration of Conformity Trade Name: Model No. : Responsible Party: Address: SONY DPF-D72 Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 U. S. A. Telephone No. : 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION Replace the battery with the specified type only. [. . . ] (This item cannot be selected on the slideshow display. ) If you select [Selected images], you can select the image you want to delete from the image list. If you select [Delete all images], the image list is displayed. A check mark is attached to the check box of all the images. Go to step 6. Press when the confirmation screen is displayed. To format the internal memory 1 2 3 4 Press MENU. Press v/V to select [Initialize] and then press . Press v/V to select [Format internal memory] and then press . The confirmation screen used for initializing the internal memory is displayed. Press v/V to select [Yes], then press . 5 Specify the image to delete from the image list. About image searching in the image list (DPF-D72 only) During a search: Displays all the images applicable to the criteria used for the search. Other than during a search: Displays all images in the device displayed on the screen. Refer to "Searching for an image (Filtering) (DPF-D72 only)" (page 39). 1Press B/b/v/V to select the image to delete and then press . A mark registered with an image on a memory card is removed when the power is turned off, or if you change the device being displayed. Tips · You can select a mark from among 3 types. · You can also use the MENU button on the photo frame. · You can enlarge or reduce the image when you select the index image display. 7 Press v/V to select [Yes] and then press . The mark is attached to the selected image. To delete the registration of a mark Select [Unmark this image] or [Unmark all images] and then press in step 5. You can also cancel the selection when you remove the check mark from the check box. [Unmark this image]: Removes a mark from the image currently displayed. (This item cannot be selected on the slideshow display. ) 38 GB Searching for an image (Filtering) (DPF-D72 only) You can search for an image which is stored in internal memory or on a memory card. You can filter an image using various criteria, such as the date, the folder in which the image is saved, the orientation of the image or mark, etc. To cancel the search for an image Press the MENU button when an image is displayed on the screen and then select [Exit search (show all photo)]. To change the criteria for a search Press the BACK button when an image you searched for is displayed on the screen. Notes · Do not turn off the power, remove the memory card during a searching. Doing so may damage the photo frame or memory card, or damage the data. · The search is cancelled automatically in the following cases. ­ When you change the playback device ­ When you search for an image which is stored on a memory card and then remove that memory card Tip You can also use the MENU button on the photo frame. 1 2 Press MENU when an image is displayed on the screen. The menu is displayed. Press B/b to select the tab. (Editing) Advanced operations The screen used for editing is displayed. Note You cannot select the (Editing) tab when the clock and calendar are displayed. 3 4 Press v/V to select [Search] and then press . [. . . ] · When you carry or store a card, put it in the case supplied with it. · Do not touch the terminal of a card with your hand or a metal object. · Do not strike, bend or drop a card. · Do not disassemble or modify a card. [. . . ]