User manual SONY NH-S2000

[. . . ] HS-2000 Operating Instructions NHS-2000 Home Entertainment Solution Welcome Welcome Congratulations on your purchase of the Sony NHS-2000 Home Entertainment Solution. It will extend superb audio and video entertainment throughout your home. · You can throw a party and have the same music playing in as many as seven rooms. · You can enjoy up to six audio/video sources at one time. - Your family members can enjoy two different DVDs simultaneously, thanks to the inclusion of both a 400-disc DVD/CD changer and a 5-disc DVD/CD changer. - Your family members can enjoy three different CDs simultaneously, thanks to the inclusion of a 400-disc DVD/CD changer, a 400-disc CD changer and a 5-disc DVD/CD changer. · The Sony system puts everything into a single remote control--and simplifies it. For example, when you select DVD, the system automatically powers up the right components, switches the right inputs. · Whether you're in the Main Room or a Remote Room, you have powerful access to entertainment as if the source components were right in the room with you. [. . . ] For one- or two-digit channels, touch the numeral buttons and touch the ENTER button. For three-digit disc numbers, touch the >10 button first, then the three numeral buttons and the ENTER button. Push this before you select a three-digit channel number. Accesses the channel you've selected with the NUMERAL buttons. Activates a custom function, if available, that may be programmed by your installer. Activates a custom function, if available, that may be programmed by your installer. Recharging the RF Remote Commander Unit. The RF Remote Commander unit is powered by an internal, rechargeable battery. When the "low battery" on-screen icon appears in the LCD window, recharge the battery by inserting into the cradle, as shown. The cradle should be plugged into a standard AC power outlet. You can continue to operate the RF Remote Commander unit, even as it recharges in the cradle. Understanding system status. The top right of the LCD window contains status information This shows your current volume control setting as decibels below full volume. (For example -20 dB is louder than -30 dB. ) RF communication between the unit and the base station antenna is functioning properly. RF communication between the unit and the base station antenna is not functioning properly. There may be interference or the transmission distance may be too great. · Place the RF Remote Commander unit closer to the RF antenna, located near the System Rack. · Avoid interference by metal objects, such as a cabinets or interference by other Radio Frequency sources. · Move the RF Remote Commander unit one inch to the left, right, up or down. Sometimes a small movement can solve the problem. The internal battery is being charged by the charger cradle. · Charge the battery by placing the RF Remote Commander unit on the charger cradle. 13 Using the In-Wall Keypad Using the In-Wall Keypad Your system is configured by your installer for two to six Remote Rooms. Each Remote Room constitutes a separate "zone" with its own selection of entertainment. Each Remote Room is supplied with an In-Wall Keypad and a handheld infrared Remote Commander® unit. IR sensor Receives IR signals from the IR Remote Control for Keypad (supplied). Display window Shows the selected source, zone volume level, zone and system status, and other system status information. Select Press to select a menu on the display on the LCD, such as a source menu, disc title list, tuner preset station list, etc. Select Press to select a menu on the display on the LCD, such as a source menu, disc title list, tuner preset station list, etc. v/V (Scroll Up/Down) Press to scroll the LCD menu. [. . . ] Do not install a new battery together with an old battery. Insert two fresh AA batteries, observing polarity as indicated. When replacing batteries, do not drop any foreign object into the Remote Commander unit casing. Replace the battery cover. 24 Troubleshooting Tips Troubleshooting If you want to. . . [. . . ]