User manual SONY NP-FM50

[. . . ] [. . . ] Traditionally once signal is output from a SACD, DVD, or CD processing occurs in the digital domain where the signal is converted back to analog to be amplified. It is within this process where noise can be introduced into the signal. However, with the new Digital Drive Amplifier the signal to amplification, the process occurs entirely in the digital domain. This allows for greater linearity, improved signal to noise ratio and lower signal distortion. Specifications ADDITIONAL FEATURES Video Section · Input Sensitivity/Impedance: S-Video In(Y):1Vp-p/75 ohm S-VideoIn(C): 0. 286Vp-p/75 ohm · OutputSensitivity/Impedance: S-Video Out(Y): 1Vp-p/75 ohm S-VideoOut(C): 0. 286Vpp/75 ohm · DVD-Video Frequency Response:PCM: 2-22kHz, ±1. 0dB Accessories Supplied Accessories · · · · Instruction Manual AV Cable 1 Way LCD Remote Control AA Battery x 2 Amplifier Section · Total Power Output 600W: Front: 120 Watts x 2 Center: 120 Watts x 1 Surround: 120 Watts x 2 (6 ohms, 20-20kHz, 0. 7% THD) · Analog Audio Input Sensitivity and Impedance: 150mV, 50 kohms · Coaxial Digital Input Sensitivity and Impedance: 0. 5V, 75 ohms · Analog Audio Output Level and Impedance: 2V, 1 kohms · Subwoofer Output Level and Impedance: 3V, 47 kohms · Subwoofer Output Level and Impedance: 3V, 47 kohms · CD Frequency Response: 2-20kHz ±1. 0dB · Signal-to-Noise Ratio (Video 1 Audio Connectors Only): More than 80dB · Harmonic Distortion: Less than 0. 03% · FM Signal-to-Noise Ratio (Mono/Stereo): 73dB/71dB · FM Alternate Channel Selectivity: 60dB · FM Stereo Separation (1 kHz): 32dB Weights & Measures · Dimensions (W x H x D): 16. 9" x 5. 2" x 17. 9" · Weight: 19. 8 lbs. General · Power Requirements: AC120V, 60Hz · Power Consumption (in Standby): 1. 5W · Power Consumption (in Operation): 180W ©2002 Sony Electronics Inc. [. . . ] [. . . ]