User manual SONY NP-FT1 INSERT: INSTALLING & REMOVING BATTERY

[. . . ] - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. [. . . ] The "InfoLITHIUM" is a lithium ion battery pack which can exchange data with compatible electronic equipment about its battery consumption. Sony recommends that you use the "InfoLITHIUM" battery pack with electronic mark. Equipment having the If you use this battery pack with electronic equipment not having the mark, the remaining battery capacity will not be indicated in minutes. * The indication may not be accurate depending on the condition and environment which the equipment is used under. Using the battery pack The power may go off although the battery remaining indicator indicates that the battery pack has enough power to operate. If this happens, charge the battery pack fully again so that the indication on the battery remaining indicator is correct. This mark indicates that this product is a genuine accessory for Sony video products. When purchasing Sony video products, Sony recommends that you purchase accessories with this "GENUINE VIDEO ACCESSORIES" mark. To prevent an accident caused by a short, do not allow any metal objects such as a necklace to touch the ` and ' terminals (A in the illustration). While checking the condition of the video camera recorder, the InfoLITHIUM battery pack measures the battery consumption and calculates the remaining battery power. If the condition changes drastically, the remaining battery indication may suddenly decrease or increase by more than 2 minutes. Do not move the video camera recorder for 30 seconds or more. Why the remaining battery indication does not match the continuous recording time in the operation manual the recording time is affected by the environmental temperature and conditions. The recording time becomes very short in a cold environment. The continuous recording time in the operation manual is measured under the condition of using a fully charged2) (or normal charged3)) battery pack in 25 °C (77 °F). As the environmental temperature and condition are different when you actually use the video camera recorder, the remaining battery time is not same as the continuous recording time in the operation manual. Even if 5 to 10 minutes is indicated as the battery remaining time on the LCD or viewfinder, the i indicator may also flash under some conditions. Power saving function: Consult the operation manual of the video camera recorder for whether your video camera recorder has the power saving function or not. [. . . ] Even if 5 to 10 minutes is indicated as the battery remaining time on the LCD or viewfinder, the i indicator may also flash under some conditions. Power saving function: Consult the operation manual of the video camera recorder for whether your video camera recorder has the power saving function or not. 2) Full charge: Charging for about 1 hour after the charge lamp of the AC power adaptor goes off. [. . . ]