User manual SONY NSXAJ700

[. . . ] Compact Disc Stereo System NSX-AJ700 U OPERATING INSTRUCTIONS En (English) MANUAL DE INSTRUCCIONES E (Español) MODE D'EMPLOI F (Français) For assistance and information (United States and Puerto Rico) 8B-NFJ-903-01 010126BMI-U-M PRECAUTIONS Read these Operating Instructions carefully and completely before operating the unit. All precautions on this booklet and on the unit should be strictly followed. Keep the Operating Instructions for future reference. Installation 1 Water and moisture -- Do not use this unit near water, such as near a bathtub, washbowl, swimming pool, or the like. [. . . ] 5 Press c. ·During programmed playback, you cannot select a disc or a track with the numbered buttons. "Can't USE" is displayed when you try to select a track . ·If the total playback time of the program exceeds 99:59 minutes, or if a track with a track number exceeding 30 is programmed, the playing time is displayed as "- -:- -". ·You cannot program more than 30 tracks. "FULL" is displayed. Blank skip play Skips the silent portion between tracks on the disc. 1 Press CD BLANK SKIP. "CD BLANK SKIP ON" is displayed and " appears on the display. " 2 Press c. ·There may be a case where Blank skip play does not function correctly. ·Blank skip play is canceled automatically when recording with program or random function (such as AI Edit Recording) starts. To cancel Blank skip play Press CD BLANK SKIP so that "CD BLANK SKIP OFF" is displayed and " " disappears. 11 RADIO OPERATIONS Tuning in to preset stations On the unit 1 Press TUNER/BAND to select the band. 2 Press cPRESET repeatedly or turn MULTI JOG. En With each press, the station with the succeeding preset number is tuned in. On the remote control 1 Press SHIFT+BAND to select the band. 2 Press the numbered buttons for the preset number of your desired station. - To select preset number 20, press +10, +10 and 0. - To select preset number 15, press +10 and 5. * Open the control panel with PANEL OPEN/CLOSE if needed. Preset tuning Preset your favorite stations and tune them in directly. Manual tuning 1 Press TUNER/BAND (SHIFT+BAND on the remote control) repeatedly to select a band. The unit switches to the radio from any other function and alternates between FM and AM. Presetting stations 1 Press TUNER/BAND to select the band. 2 Press fDOWN or gUP to tune in to the desired station. 3 Press aSET to store the station. The preset number, beginning from "1", appears on the display. To clear a preset station 1 Tune in to the station by preset tuning. 2 Press sCLEAR, then press aSET within 4 seconds. Preset numbers of preset stations in the band with higher numbers decrease by one. 2 Press fDOWN or gUP to tune in to a station. "TUNE" is displayed when a station is tuned in. "1" lights up for FM stereo reception. To search for a station automatically (Auto Search) Hold down fDOWN or gUP. The unit searches for a station up or down the band and stops at reception. To stop the search manually, press fDOWN or gUP. ·Auto Search may not stop at stations with weak signals. 4 Repeat step 1 to 3 to preset other stations. ·You cannot store more than a total of 32 preset stations. "FULL" is displayed. 12 Adjustments Antennas Keep antennas away from metallic objects, electrical equipment and cords. If receiving condition is poor, connect optional outdoor antenna to FM 75 terminal. Be sure to connect the shield braid of the antenna to the 2 terminal. [. . . ] ·Possibly a short circuit in the speaker terminals. Disconnect the AC power cord from the AC power outlet and re-connect the speaker cords correctly. The unit blacks out when the unit is turned off. 1 Turn the unit off and disconnect the AC power cord from the AC power outlet. [. . . ]