User manual SONY NT-2

[. . . ] Should the battery be swallowed, immediately consult a doctor. â· Be sure to observe the correct polarity when installing the battery. â· Do not hold the battery with metallic tweezers, as a short-circuit may occur. [. . . ] You can select the automatic adjustment mode according to the sound source. If you want to control the recording level more precisely, you can adjust the level manually. When the recorder is in other modes, while pressing the red button on REC, press FUNCTION. press MODE repeatedly until "SPEECH" or "MUSIC" appears in the display. Each time you press MODE, the display changes as follows: "SPEECH" n "MUSIC" n "MANUAL" To record conversation, etc. Each time you pres MODE while recording, while in the standby mode, or right after the recorder has stopped recording, the display changes as follows: Tape counter (counted length of the tape, not elapsed time) v Remaining time v Year, month, and date v Hour, minute, and second (The clock operates in 24-hour system. When the recorder is in other modes, while pressing the red button on REC, press FUNCTION. Observe the display and adjust the level so that the top bar lights up once in a while. The remaining time of the tape is less than about 4 minutes. 1 Connect the LINE OUT jack of the recorder to the LINE IN jack of your stereo system with the line cable (supplied). Insert the tape with the side you want to listen to facing cassette holder. Slide DIR MODE to select playing one side or both sides of the tape. * The recorder plays both sides three times continuously and then automatically stops. When listening with the headphones, you can select the sound quality. [. . . ] The HOLD switch on the remote control works to lock the controls on the remote controller. ) Push the white tab on the opposite side of the cassette with a pointed object. When the red tab is visible on the side you want to record on, recording can be done. [. . . ]