User manual SONY NTM-910DUAL

[. . . ] 3-242-835-21(1) WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Features · Up to 27 channels for maximized reception. · Voice Activation eliminates most background noise for a more peaceful sleep. · 5 indicators for monitoring sound levels. · RANGE ALM. , POWER/BATT and CHARGE indicators allow you to know the operating condition of the receiver. [. . . ] Never pull the plug out by the cord. NTM-910DUAL © 2007 Sony Corporation Printed in China Power-Cord Protection Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance. Lightning For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and powerline surges. Object and Liquid Entry Never push objects of any kind into the appliance through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance. For customers who purchased this product in the USA Please register this product on line at http://www. sony. com/productregistration . Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you. Receiver Circuitry: Single superheterodyne Power requirement: AC power adaptor (DC IN 9 V jack): 120 V AC, 60 Hz 2. 4 V DC, Rechargeable battery pack BP-TR10 Audio power output: 80 mW (using the supplied AC power adaptor) 28 mW (using 2. 4 V DC) Speaker: 57 mm dia. , 8 Dimensions: 94 × 109 × 59 mm (w/h/d) (3 3/4 × 4 3/8 × 2 3/8 inches) not incl. projecting parts and antenna 94 × 157 × 59 mm (w/h/d) (3 3/4 × 6 1/4 × 2 3/8 inches) incl. projecting parts and antenna Mass: Approx. a rechargeable battery pack Supplied accessories: AC power adaptor (2) Rechargeable battery pack BP-TR10 (2) Design and specifications are subject to change without notice. Cleaning Unplug the appliance from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the appliance. -If liquid has been spilled or objects have fallen into the appliance. -If the appliance has been exposed to rain or water. -The appliance does not appear to operate normally or exhibits a marked change in performance. -If the appliance does not operate normally when following the operating instructions, adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation. -If the appliance has been subject to excessive shock by being dropped, or the cabinet has been damaged. Servicing Do not attempt to service the appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement parts When replacement parts are required, be sure the service technician has used replacement parts specified by Sony that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check Upon completion of any service or repairs to the appliance, ask the service technician to perform routine safety checks (as specified by Sony) to determine that the appliance is in safe operating condition. Transmitter B BP-TR10 battery pack Antenna Tab Black POWER indicator C Power Sources Transmitter (See Fig. A) Connect the AC power cord to a wall outlet. Setting Up Turning on the power Set the OFF/ON switch of the transmitter and the OFF/ON/VOICE ACT switch of the receiver to ON to turn on the power. The POWER indicator of the transmitter and the POWER/BATT indicator of the receiver will light up. To turn off the power, set the OFF/ON switch of the transmitter and the OFF/ON/VOICE ACT switch of the receiver to OFF. Built-in microphone Red Receiver To operate on battery (See Fig. [. . . ] Only one indicator may light up if the sound from the transmitter is not loud, or all the indicators may light up if the sound is very loud. You can also hear sounds through the speaker. To adjust the volume The volume of the sounds you receive varies depending on the loudness of the baby's voice, distance between the transmitter and the baby, direction of the built-in microphone of the transmitter, obstructions, etc. If the volume level is set too high and is accompanied by a shrill noise, reduce the volume. [. . . ]