User manual SONY NV-U50T

[. . . ] Contents of this manual are written for users with knowledge of using the Microsoft® Windows® operating system. For details about computer operation, see the manual for your computer. Illustrations in this manual may differ from the actual device. Retain this manual in a place where you can refer to at any future time. [. . . ] ) for up to 20 minutes to allow for GPS signals to be received before using the navigation system. To turn the unit off The unit enters standby mode for minimum power consumption. Note Be sure to take the unit out of the cradle and disconnect the car battery adapter when the unit is not in use to prevent car battery drain. * Lights up in bright green when signal reception is sufficient for navigation. Lights up in dark green when signal has been lost. After turning the unit on, touch the desired language. Read the warning display, then touch "Agree. Common procedures to operate the system are explained. General operations can be performed on the touch screen. Touch the displayed icons with your finger gently. Note Do not press the display with excessive force, or use any sharp article, such as a pen, etc. During menu operation: To return to the previous display, touch To cancel the menu selection, touch current car position display appears). You can set items in the menu by the following procedures. The keyboard display appears when you need to enter text. You need only enter characters in upper case, as the system automatically converts them to appropriate characters. You can enter special characters when necessary (e. In the menu display, touch to show the map, then touch the map. Touch "Settings, " then touch a desired item. Enter an alphabetical character "ABC") repeatedly until the desired character is highlighted in the line above the keyboard. "NUM" to switch to the number keyboard, then the desired number key; and "ABC" to switch back. Enter a number Touch v/V to scroll the list, then touch a desired setting item. Enter a space delete a character select a candidate You can select either a mobile phone keyboard or a character keyboard (alphabetical) for the keyboard display. [. . . ] In high temperatures, the LCD may darken and not display clearly. In low temperatures, afterimage may occur on the LCD. These are not malfunctions, and the LCD will return to normal when the temperature returns to within the specified operating range. The LCD is dark, or the map colour has changed. [. . . ]