User manual SONY NVX-P1

[. . . ] Contents of this manual are written for users with knowledge of using the Microsoft® Windows® operating system. Illustrations in this manual may differ from the actual device. Countries/regions are indicated by national flag icons. Thank you for purchasing this Sony Personal Navigation System. [. . . ] Setting the destination from the 2D map display You can set the destination directly from the 2D map display using the pop-up menu. Search for the address to save as a Favourite. for details , see "Setting the destination and starting guidance" on page 12. In the preview display, select "Save" using </M/, /m, then press (OK). Press , select "Map" using M/m, then press (OK). Use / to zoom in/out the map, and </M/ , /m to move around the map. If you do not need to change the name, proceed from step 5. Select "Name" using M/m, then press (OK). Select "Save as Favourite" using M/m, then press (OK). You can delete all Avoid Areas at once from the "Preferences" display (page 18). You can use the pop-up menu to access navigational functions from the 2D map. In the 2D map display, show the cross-hair by pressing (OK), locate the desired point using </M/, /m, then press (OK) to show the popup menu. Select the following items using </M/, /m and (OK). Sets the selected point as the destination, calculates a route from the current position, and starts the route guidance. Show details Shows the "Address Details" display from which you can view details of the selected point; add it to Multi-stop Trip; save it as a Favourite; set it as a destination. The category list appears listed in order of distance from your current position. If GPS signal is received, you do not need to set the departure point unless you want to start elsewhere. , from the main menu, see "Setting the destination and starting guidance" on page 12. When you set from the 2D map display and the pop-up menu, see "Setting the destination from the 2D map display" on page 15. Once the demonstration is complete, it returns to a normal mode. To repeat the route demonstration mode Select "Repeat" in step 4. To exit the route demonstration Follow step 1 to 3, uncheck "Demonstrate Route, " then select "Save" using M/m and (OK). [. . . ] There is an obstacle in front of the GPS receiver. T Install the unit where the signal is not interrupted by the body of the car, etc. Signal may not be received if a window film is attached. in that case , use an external GPS aerial (not supplied). [. . . ]