User manual SONY NV-XF160

[. . . ] The map and POI data may contain copyrighted material. Copyrighted data on a "Memory Stick Duo" should be used within the limits of the copyright law. All other trademarks are trademarks of their respective owners. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. [. . . ] Start navigation to your home a circumflex start navigation to the Quick Link 1 nearest POI (Point Of Interest) stored on Quick Links* horizontal line (left to right) Quick Link 2 The top menu appears when turning on the unit by pressing ?/1 (except during route guidance, in which case the map appears). Vertical line (downwards) Quick Link 3 horizontal line (right to left) To show the top menu from the map display, touch the map. To return to the top menu from any menu display, press VOICE/POS. During menu operation: To return to the previous display, touch or . The keyboard display appears when you need to enter text. You need only enter characters in upper case, as the system automatically converts them to appropriate characters. You can enter special characters when necessary. Before starting, check that GPS signals are sufficient for navigation (page 5). As an example, setting the destination by the address is introduced here. For details on setting the destination in other ways, see "Setting the destination in other ways" on page 8. Place the intersection of the crosshair on a desired point, then touch to show the map scrolling mode menu, where you can set the point as a destination, etc. Touch to return to the current car position display. Before connecting to your computer, install the PC connection software (ActiveSync) to your computer. Connect the unit to your computer with the USB cable. If you insert the disc into your computer, the screen appears automatically. Notes when transferring data During transfer, do not ­ disconnect the USB cable. enter unit standby mode , or reset the unit. ­ shut down the computer, enter computer standby mode, or restart the computer. Be sure to log on as administrator when installing this software. Language Manager Language data for on-screen display and voice guidance can be added to the unit, and unnecessary language data can be deleted from the unit. Read the Manual You can read the PDF manual which contains further information on operations available. [. . . ] Some stationary blue, red or green dots may appear on the monitor. These are called "bright spots, " and can happen with any LCD. The LCD panel is precision-manufactured with more than 99. However, it is possible that a small percentage (typically 0. [. . . ]