User manual SONY NW-E307

[. . . ] To go to the section you want to read, click the title in the PDF Bookmarks, the title in the "Table of Contents" of the Operating Instructions, or the page in the sentences. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation of the apparatus with news papers, tablecloths, curtains, etc. [. . . ] The diagram above shows the order when all the display types are set to "ON" in the "Display Screen" menu. You cannot change display mode while using the FM tuner (NW-E303/E305/E307 only). You can select whether or not to use each of the 6 display types: "Position", "Track Info", "Clock", "Fruits", "Sky", and "Water" by pressing the DISP/FM button (NW-E303/ E305/E307), or DISP button (NW-E205/ E207). You can only view the screen which is set to "ON" in the "Display Screen" menu. Press and hold the /MENU button until the following menu screen appears. You can preset 2 settings, which can be selected while the audio player is played. Sound quality Bass Treble Emphasis level -4 to +3 -4 to +3 You can preset the desired sound quality settings as " 1(Sound1)" and " 2(Sound2)" and select either one while playing music. Press and hold the /MENU button until the following menu screen appears. Each time the button is pressed, the Sound quality setting is changed as follows: Select " Note You cannot select the Sound quality while using the FM tuner (NW-E303/E305/E307 only). You can protect your Network Walkman against accidental operation by using the HOLD function when carrying it. If you press buttons while the HOLD function is activated, "HOLD" appears in the display. You can transfer data from the hard disk of your computer to the built-in flash memory using Windows Explorer. If you store a lot of non-audio data into the builtin flash memory, the space for audio data is reduced by the same amount. â· Do not edit any file in the [OMGAUDIO] folder of the built-in flash memory on Windows Explorer, as audio files will not play back. â· Do not format the built-in flash memory using Windows Explorer. If you format the built-in flash memory, format it using the "Format" menu of the Network Walkman (page 39). You can set the current time and display it while the audio player is played or in stop mode. As you did in step 3, adjust the "month" and "date", and press i (VOL) of the 5 Direction JOG to confirm. Press and hold the /MENU button until the following menu screen appears. Note, however, when the "Clock" is set to "OFF" in the "Display Screen" menu (page 28), you cannot display the current time by the procedure above. With AVLS, you can listen to music at a comfortable volume level. You can select the date format from among "yy/mm/dd", "dd/mm/yy" and "mm/dd/yy". [. . . ] The ATRAC3plus is new audio compression technology that enables equal or higher quality sound comparing to ATRAC3. If the bit rate is large, that means a large amount of information is used to play music. , ATRAC3plus), 64 kbps data offers better sound quality than 48 kbps data. However, audio files in formats such as MP3 have different encoding methods, and thus sound quality cannot be determined by simply comparing the bit rate. [. . . ]