User manual SONY NW-E73

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] Preset mode: Press the VOLUME +/­ button to set the volume level to any of three preset levels: LO, MID, or HI. Note If AVLS (page 25) is set, the actual volume may be lower than the settings. 2 Rotate the Shuttle switch to select "VOL MID xx, " and then press the VOLUME +/­ button to set the volume level of the MID preset. 3 Rotate the Shuttle switch to select "VOL HI xx, " and then press the VOLUME +/­ button to set the volume level of the HI preset. With these settings, you can adjust the volume level to any of three preset levels: LO, MID, or HI. With this setting, you can adjust the volume level by pressing the volume button. Turning off the beep sound (BEEP) You can turn off the beep sounds of your Network Walkman. Menu OFF ON Backlight mode Always off Turns on for three seconds after each operation (or until scrolling is complete) Nx button Press (Confirm) The songs group function may be disabled* when a song has been deleted from or added the built-in flash memory by operating the computer in which the SonicStage software is not installed (page 10). In such a case, you may enable the group function by regrouping audio file. When you need to edit audio file, make sure that you connect your Network Walkman to the computer and use the SonicStage software. * The order of songs will not be changed even if the song group function is disabled. When regrouping audio file is complete, "COMPLETE" is displayed and the display returns to the indication in step 2. Note You cannot regroup songs while playing music. Z Tip In some cases, you may not be able to restore the former grouping. When you need to edit audio file, connect your Network Walkman to the computer and use the SonicStage software. You cannot regroup audio file while playing music. You can use your Network Walkman to format the built-in flash memory. If memory is formatted, all data previously stored in the memory will be erased. Be sure to verify the data stored in the memory prior to formatting. When formatting is complete, "COMPLETE" is displayed and the display returns to the indication in step 2. You cannot format memory while playing music. You cannot format memory while playing music. [. . . ] With the Network Walkman, priority is given to the display of ID3 Tag information. Use of your Network Walkman with a USB hub or a USB extension cable is not guaranteed. Always connect your Network Walkman to the computer directly using the dedicated USB cable. Some USB devices connected to the computer may interfere with the proper operation of your Network Walkman. [. . . ]