User manual SONY NW-S21 annexe 1

[. . . ] 2-514-950-11(1) Portable IC Audio Player Network Walkman Operating Instructions English Operating Instructions are contained in the supplied CD-ROM. Français le mode d'emploi se trouve sur le CD-ROM fourni. Die deutsche Bedienungsanleitung ist auf der mitgelieferten CD-ROM enthalten. El manual de instrucciones en español se incluye en el CD-ROM suministrado. [. . . ] Note The display automatically returns to the normal playback screen if you do not operate any button for 30 seconds. SOUND/ REPEAT button Press and hold the SOUND/ REPEAT button for half a second. The Sound quality setting is changed as follows: S1 S2 (none) To return to the normal Sound quality Select "SOUND OFF. " continued 23 Adjusting treble and bass (Digital sound preset) 3 Adjusting the Sound quality You can adjust the sound quality of bass and treble parts. Sound quality Bass Treble Emphasis level -4 to +3 -4 to +3 Set the tone for "SOUND 1. " 1 Press the . ­/+> button to select "SOUND 1 >" and press the Nx button to confirm. 2 "BASS:+1" appears, press the . ­ /+> button to adjust the emphasis level of bass sound and press the Nx button to confirm. 3 "TREBLE: 0" appears, press the . ­/+> button to adjust the emphasis level of treble sound and press the Nx button to confirm. The display returns to the normal screen. You can preset desired sound quality settings as "Sound 1" and "Sound 2. " While playing music, you can assign a preset sound quality to music. . ­/+> button Nx button 4 To adjust the "SOUND 2" setting Select "SOUND 2" in step 3. To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. MENU button 1 Press the MENU button. The menu screen is displayed. REPEATMODE> 2 Press the . ­/+> button to select "SOUND >" and press the Nx button to confirm. SOUND:2> 24 Locking the controls (HOLD) You can protect your Network Walkman against accidental operation by using the HOLD function when carrying it. Storing non-audio data You can transfer data from the hard disk of your computer to the built-in flash memory using Windows Explorer. The built-in flash memory is displayed in Windows Explorer as an external drive (for example: as the D drive). Note Advanced Operations HOLD switch If you store a lot of non-audio data into the built-in flash memory, the space for audio data is reduced by the same amount. Slide the HOLD switch in the direction of the arrow. All operation buttons are disabled. If you press buttons while the HOLD switch is on, "HOLD" blinks in the display. To release the HOLD function Slide the HOLD switch in the opposite direction of the arrow. 25 B Adjusting the settings of your Network Walkman 1 Adjusting the time setting of your Network Walkman to a computer's built-in clock If the function is set to "ON, " the time setting of your Network Walkman is automatically adjusted to the computer's built-in clock when your Network Walkman is connected and audio file transferring is executed (the SonicStage software must be started). You cannot play a song with a limited playing period without the time setting of your Network Walkman. To set the date and time on your Network Walkman, refer to "Adjusting the current time setting (DATE-TIME)" on page 27. . ­/+> button Nx button Press the MENU button. The menu screen is displayed. REPEATMODE> 2 Press the . ­/+> button to select "PC CLK:" and press the Nx button to confirm. PC CLK:ON 3 4 Press the . ­/+> button to select "OFF" and press the Nx button to confirm. The display returns to the normal screen. To change the setting to "ON" Select "ON" in step 3. To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. MENU button Changing the setting to "OFF" The time setting of your Network Walkman does not change even when your Network Walkman is connected to a computer. 26 Adjusting the current time setting (DATE-TIME) You can set and display the current time. You can also adjust the time setting of your Network Walkman to a computer's built-in clock by connecting your Network Walkman to the computer (page 26). . ­/+> button Nx button 3 Press the . ­/+> button to adjust the "year" setting and press the Nx button to confirm. The "month" digit blinks. 2004y 1m 1d 4 As you did in step 3, adjust the settings for "month" and "date. " After pressing the . ­/+> button to adjust the "date" setting and pressing the Nx button to confirm, the display switches to the time setting screen. 0:00 Adjusting the settings of your Network Walkman 5 MENU button Press the . ­/+> button to adjust the "hour" setting and press the Nx button to confirm. The "minute" digit blinks. 0:00 1 Press the MENU button. The menu screen is displayed. REPEATMODE> 6 2 Press the . ­/+> button to select "DATE-TIME" and press the Nx button to confirm. The "year" digit blinks. 2004y 1m 1d As you did in step 5, adjust the settings for "minute. " After pressing the . ­/+> button to adjust the "minute" setting and pressing the Nx button to confirm, the display switches to the time setting screen. DATE-TIME 7 Press the MENU button. The display returns to the normal screen. continued 27 Adjusting the current time setting (DATE-TIME) To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Limiting the volume (AVLS) You can set AVLS (Automatic Volume Limiter System) to limit the maximum volume to prevent auditory disturbance or distraction. With AVLS, you can listen to music at a comfortable volume level. . ­/+> button Nx button To display the current time Press the MENU button and hold it. You can display the current time while pressing the button. Notes · If the unit is not used for a long time, your settings of the date and time may be reset. · If the current time is not set, the display for the date and time will be "-- --. " · If PC CLK is set to "ON" (page 26), the time setting of your Network Walkman is automatically adjusted to a computer's built-in clock when your Network Walkman is connected to the computer. · Depending on the shipping area, the time display format of the unit is set to a 12-hour display or a 24-hour display. [. . . ] · Do not disconnect the USB cable or remove your Network Walkman when the ACCESS lamp is blinking. The data being transferred may be destroyed. · Install Service Pack 3 or later when you use Windows 2000. · With the Network Walkman, priority is given to the display of ID3 Tag information. [. . . ]