User manual SONY NW-S703F

[. . . ] Included with the player are the Quick Start Guide and this PDF-format Operation Guide. Additionally, after installing the SonicStage software from the supplied CD-ROM, you can refer to the Help within SonicStage. ­ The Quick Start Guide explains set up and the basic operations, enabling you to import songs to a computer, to transfer them to the player, and to play them back. ­ This Operation Guide explains standard and advanced features, enabling you to make full use of the player and troubleshoot problems. [. . . ] The song to be deleted starts playing back for confirmation. "COMPLETE" appears after the song is deleted. To stop deleting song Select "Cancel" in step and press the button. It may take time to complete deleting in the case of many songs. Press the button while playing the song in the folder to be "COMPLETE" appears after the song is deleted. It may take time to complete deleting in the case of many songs. "COMPLETE" appears after the song is deleted. The player is rechargeable when connected to a computer When you connect the player to your computer, use the supplied USB cable. When you use the player for the first time, or if you have not used the player for a long time, recharge it fully (to in the remaining battery indication of the display). * This is the approximate charging time when the battery power is low and the "USB Bus Powered" setting ( page 59) is "High-Power500mA" under room temperature. It will also be longer if you transfer audio file(s) to the player while charging. If "LOW BATTERY" appears, you cannot play back with the player. In this case, charge the battery by connecting to your computer. "DATA ACCESS" appears in the display while the player accesses the computer. Do not disconnect the player while "DATA ACCESS" appears or the data being transferred may be destroyed. Some USB devices connected to the computer may interfere with the proper operation of the player. The control buttons on the player are all disabled while it is connected to a computer. By following a few simple guidelines, you can extend the playing time available from a battery charge. Screen display auto-off Setting the display to turn off after a certain period of time of not using the player (approx. 15 seconds), can help to save battery power. see "Setting to the Power Save Screen (Power Save Mode)" ( page 60) for the setting method. Adjust song format and bit rate The playing time varies, as battery charge can be affected by the format and bit rate of the audio files that are played. [. . . ] About the customer support Web site If you have any questions about or issue with this product, visit the following web sites. OpenMG, ATRAC, ATRAC3, ATRAC3plus, ATRAC Advanced Lossless and their logos are trademarks of Sony Corporation. "WALKMAN" and "WALKMAN" logo are registered trademarks of Sony Corporation. Microsoft, Windows, Windows NT and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ]