User manual SONY NW-E95

[. . . ] 2-581-015-61(1) Portable IC Audio Player Network Walkman Operating Instructions "WALKMAN" is a registered trademark of Sony Corporation to represent Headphone Stereo products. is a trademark of Sony Corporation. NW-E95/E99 © 2004 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table cloths, curtains, etc. [. . . ] The "month" digit blinks. 2004y 1m 1d 4 Nx button As you did in step 3, adjust the settings for "month" and "date. " After rotating the Shuttle switch to adjust the "date" setting and pressing the Nx button to confirm, the display switches to the time setting screen. 0:00 Adjusting the settings of your Network Walkman MENU button 1 Press the MENU button. The menu screen is displayed. REPEATMODE> 2 Rotate the Shuttle switch to select "DATE-TIME" and press the Nx button to confirm. The "year" digit blinks. 2004y 1m 1d Group Mod e 5 Rotate the Shuttle switch to adjust the "hour" setting and press the Nx button to confirm. The "minute" digit blinks. 0:00 6 As you did in step 5, adjust the settings for "minute. " After rotating the Shuttle switch to adjust the "minute" setting and pressing the Nx button to confirm, the display switches to the time setting screen. DATE-TIME 7 Press the MENU button. The display returns to the normal screen. continued 27 Adjusting the current time setting (DATE-TIME) To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Limiting the volume (AVLS) You can set AVLS (Automatic Volume Limiter System) to limit the maximum volume to prevent auditory disturbance or distraction. With AVLS, you can listen to music at a comfortable volume level. Shuttle switch Press (Confirm) to (+/>) to (. /­) ode To display the current time Press the MENU button and hold it. You can display the current time while pressing the button. Notes · If the unit is not used for a long time, your settings of the date and time may be reset. · If the current time is not set, the display for the date and time will be "-- --. " · If PC CLK is set to "ON" (page 26), the time setting of your Network Walkman is automatically adjusted to a computer's built-in clock when your Network Walkman is connected to the computer. · Depending on the shipping area, the time display format of the unit is set to a 12-hour display or a 24-hour display. You cannot switch between a 12-hour display and a 24-hour display in the unit. A 24-hour display is shown in this manual. Nx button MENU button 1 Press the MENU button. The menu screen is displayed. REPEATMODE> 2 Rotate the Shuttle switch to select "AVLS" and press the Nx button to confirm. "OFF" blinks. AVLS :OFF 3 Rotate the Shuttle switch to select "ON" and press the Nx button to confirm. The volume is kept at a moderate level. 28 Group Mod e 4 Press the MENU button. To change the setting to "OFF" Select "OFF" in step 3. Setting the volume using the preset volume function There are two modes to adjust the volume level. Manual mode: Press the VOLUME +/­ button to adjust the volume level in the range of 0 to 31. Preset mode: Press the VOLUME +/­ button to set the volume level to any of three preset levels: LO, MID, or HI. Shuttle switch Press (Confirm) to (+/>) to (. /­) ode To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Adjusting the settings of your Network Walkman Nx button MENU VOLUME button +/­ button Setting a volume level of the preset mode 1 Press the MENU button. The menu screen is displayed. REPEATMODE> 2 Rotate the Shuttle switch to select "VOL: MAN. " VOL :MAN continued Group Mod e 29 Setting the volume using the preset volume function To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Note If AVLS (page 28) is set, the actual volume may be lower than the settings. Releasing AVLS returns the volume to the preset level. 3 4 Press the Nx button to confirm. Rotate the Shuttle switch to select "SET >. " VOL :SET> Switching to the manual mode 5 Press the Nx button to confirm. * "xx" stands for numeric values of the volume level. VOL LO xx 1 2 Press the MENU button. [. . . ] Always connect your Network Walkman to the computer directly using the dedicated USB cable. · Some USB devices connected to the computer may interfere with the proper operation of your Network Walkman. · The control buttons on your Network Walkman are all disabled while it is connected to a computer. · You can display the data stored in the built-in flash memory using Windows Explorer when your Network Walkman is connected to the computer. [. . . ]