User manual SONY NWZ-F886

[. . . ] Plug in the USB cable with facing upward, making sure the connection is secure. How to Install the Help Guide and Content Transfer (for Mac) 1 Connect your Walkman to a running computer using the USB cable (supplied). Finder, then open the [FOR_MAC] folder. Quick Start Guide How to Install the Supplied Software How to Use Your “WALKMAN” Initial Settings 2 On the computer, select [WALKMAN] in the sidebar of 3 Double-click the installer icon of the desired software: To install the Help Guide: [Help_Guide_Installer_for_Mac] To install the Content Transfer software: [ContentTransfer. pkg] NWZ-F886/F887 1 Use the supplied USB cable to connect your Walkman to a running computer and charge the Walkman. Your Walkman turns on. Note If ˎˎ a large battery symbol is displayed while you are charging your Walkman, the remaining charge is still too low for the Walkman to operate. The Walkman will start automatically after being charged for about 10 minutes. 4 Follow the on-screen instructions.  Hint If ˎˎ [USB connected] appears on the screen, tap [Turn on USB storage] to connect your Walkman. If ˎˎ the following screen does not appear, swipe the status bar on the top of the screen and tap [Turn on USB storage] on the notification panel. After the installer finishes, the alias (shortcut) of the installed software (Help Guide or the Content Transfer software) appears on the desktop of your computer.  Hint Before you attempt to delete the software from your Walkman, copy the ˎˎ [FOR_MAC] folder to your Mac computer as a backup if necessary. About the manuals In addition to this Quick Start Guide, this model is accompanied by both an excerpted version and a full version of the Help Guide that give more detailed operating instructions. [. . . ] Press and hold: Turns the power off. Your Walkman will be reset if you press and hold the  button for about 8 ˎˎ seconds. 6 Select the desired language. 7 Tap  to begin using your Walkman. 4 Follow the on-screen instructions. After the install wizard finishes, the WALKMAN Guide and Media Go shortcuts appear on the desktop of your computer. The Help Guide is included in the WALKMAN Guide. For a Mac computer, make sure that the OS is Mac OS X v10. 6 or later. Not supported by OSs other than above  Touch a Bluetooth device equipped with the NFC feature to this mark. mark  Speaker About volume operation (Only for countries/areas complying with European Directives) An alarm (beep)* and warning [Check the volume level] are meant to protect your ears when you raise the volume setting beyond a specific level for the first time. You can cancel the alarm and warning by tapping [OK] on the alert dialog. * The alarm (beep) does not sound when connecting a Bluetooth audio device. 8 Set the Wi-Fi connection, Google account and date/time, etc. , following the instructions shown on the screen.  Hint Wi-Fi connection and Google account can also be set afterwards. ˎˎ Turning On/Off Your “WALKMAN” Turn off your Walkman if you will not use the Walkman for a long time. How to Use the Touch Screen Your Walkman screen is touch-sensitive. You can operate your Walkman by gestures such as tapping, pressing, and flicking the screen. Refer to the Help Guide for details. How to Use the Help Guide on Your “WALKMAN” When you access the Internet, you can view the full version of the Help Guide on the web from your “WALKMAN. ” Troubleshooting If your Walkman does not function as expected, try the following steps to resolve the issue. Specifications Starting up time from battery shortage condition About 10 minutes Temperature of battery use 5 °C to 35 °C (41 °F to 95 °F) 1 Tap Press and Hold 1 Tap  Hint from the Home screen then Guide]. [Help Find the symptoms of the issue in “Troubleshooting” in the Help Guide (HTML document), and try any corrective actions listed. For details on connecting to a computer, see the table below. Precautions You must accept the terms of the End User License Agreement when you use your Walkman for the first time. To read them again later, tap – [Settings] – [  About device] – [Legal information] – [Sony EULA]. Information on laws and trademarks Google, Android and other marks are trademarks of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3. 0 Attribution License. For more information on laws, regulations and trademark rights, refer to “Important Information” contained in the supplied software. To read it, install the supplied software on your computer. About the headphones Avoid playing the unit at so loud a volume that extended play might affect ˎˎ your hearing. At ˎˎ a high volume outside sounds may become inaudible. Avoid listening to the unit in situations where hearing must not be impaired, for example, while driving or cycling. As ˎˎ the supplied headphones are of open-air design, sounds go out through the headphones. Remember not to disturb those close to you. 2 Connect your Walkman to your computer to charge the battery. You may be able to resolve some issues by charging the battery. 1 Press the  button to turn on your Walkman. Press and hold the  button to turn off your Walkman. off] – [OK]. Flick Drag The Help Guide in the WALKMAN Guide installed on your ˎˎ computer is the excerpted version. [. . . ]  Make sure that the USB connection is not turned off. If your Walkman is in MSC mode, drag the status bar, then tap [Turn on USB storage] on the notification panel followed by [Turn on USB storage] then [ON].  Some devices or software may not recognize your Walkman when USB debugging is enabled. Tap , then tap [Settings] – [  Developer options] – [USB debugging] and uncheck the box. [. . . ]