User manual SONY NWZ-WS613

[. . . ] Optional replacement earbuds can be ordered from your nearest Sony dealer. Install the earbuds onto the headphones so that the tip of the inner ˎˎ part of the earbuds  fits into the  position on the projection of the headphones. Make sure that the earbuds fit straight on, not at an angle, to prevent ˎˎ the earbuds from detaching and remaining in your ears. Walkman () using a soft dry cloth, if the terminal is wet or dirty. the order of the left () part first, then the right () part. 2 Attach your Walkman to the USB cradle in About the manuals To see the detailed information about WALKMAN®, access to Help Guide on the internet. [. . . ] ˎˎMake sure that the Remote Commander is turned on. ˎˎMake sure that your Walkman is turned on. ˎˎReset the Remote Commander and your Walkman. For more information, refer to the “You cannot operate your Walkman by the Remote Commander. ” section on the Help Guide. ˎˎYou cannot use the Remote Commander when it is wet. Dry the Remote Commander using a dry cloth. ˎˎReplace the battery of the Remote Commander. For more information, refer to the “Replacing the battery of the Remote Commander” section on the Help Guide. Owner’s Record 1 2 Press and hold the  button located  button  button 1 Put your Walkman in pairing mode. Press and hold the  button located on the left () part for 7 seconds. The Bluetooth lamp located on the left () part blinks in blue and red quickly alternately. When connecting your Walkman and smartphone from the second time onwards, press and hold the button for 2 seconds. Find the symptoms of the issue in “Troubleshooting” in the Help Guide (HTML document), and try any corrective actions listed. the battery. The model and serial numbers are located on the back of the player. Record them in the space provided below. Refer to these numbers in the spaces whenever you call upon your Sony dealer regarding this product. ________________________ Serial No. _________________________ 2 Connect your Walkman to your computer to charge 3 Press the RESET button with a pen button TRA REGISTERED No: ER34837/14 DEALER No: DA0096946/12 For ˎˎ information on laws, regulations and trademark rights, refer to “Important Information” contained in the supplied software. To read it, install the supplied software on your computer. Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes, Mac, iOS and OS X ˎˎ are trademarks of Apple Inc. , registered in the U. S. App Store is a service mark of Apple Inc. “Made for iPod, ”and“Made for iPhone, ” mean that an electronic accessory ˎˎ has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance. Compatible iPhone/iPod models ˎˎ 2 Hang the neckband over the top of your ears and behind your head. 3 Press the ¼¼Hint License and Trademark Notice 3 Place the headphone sections into your ears. [. . . ] For more information, refer to the “Specification” section on the Help Guide. Precautions About the in-ear headphones The earbuds seal your ears. Therefore, be aware that there is a risk of damage to your ears or eardrums if strong pressure is applied to the earbuds or the earbuds are suddenly removed from your ears. After use, be sure to take the earbuds off your ears gently. Avoid playing the unit at so loud a volume that extended play might affect ˎˎ your hearing. [. . . ]