User manual SONY PBD-V30

[. . . ] To prevent fire or shock hazard, do not expose the player to rain or moisture. The socket outlet shall be installed near the equipment and shall be easily accessible. Before operating the player, please read this manual thoroughly and retain it for future reference. The supplied interference Audio/Video cable must be used with the equipment in order to comply with the limits for a digital device pursuant to EN 55013. [. . . ] If you turn on the player while charging, charging is suspended until you turn off the player. Charging will resume when you turn off the player. â· If you press OPEN while charging, charging is suspended. After attaching the battery pack, connect the AC power adapter, then recharge the battery pack. (When using a recharged battery pack, the AC power adapter is not necessary. Connect the AC power adapter to the player and plug into the mains. When charging starts, "CHG" appears in the front panel display. Disconnect the AC power adapter from the player and pull out from the mains after charging. When charging is complete, "CHG" disappears from the front panel display. When to recharge the battery pack When the battery power becomes weak, "i" appears on the TV screen and in the front panel display while using the player. If you continue to use the player while "i" is displayed, eventually the player will stop working. Use the same connections if your amplifier conforms to "Pro Logic. When the component with a built-in MPEG Audio decoder or Dolby Digital decoder is connected, the player plays DVD VIDEOs with sound recorded in MPEG Audio and Dolby Digital (AC-3) format which produces the effect of being in a movie theatre or a concert hall. DVD player Component with a builtin Dolby Digital decoder You cannot make digital audio recordings of discs recorded in Dolby Digital (AC-3) format directly using an MD deck or DAT deck. note on digital recording This player can be connected to an optional MD unit. Before making a digital recording, be sure that "CD" appears in the front panel display after turning this player on or closing the disc cover. Otherwise, the track numbers may not be recorded correctly. DVD player Amplifier with a digital connector, MD deck, DAT deck, etc. When you make the connections above, set "DIGITAL OUT" in "INITIAL SETUP" to "D-PCM" (Downmix PCM). Otherwise, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged. You can make all the necessary settings for setup and connections for this player using the INITIAL SETUP menu. Note When you select a language that is not recorded on the DVD VIDEO, another recorded language is automatically selected. [. . . ] Consequently, a 12 cm VIDEO CD can contain up to 74 minutes of moving pictures. vIDEO CDs also contain compact audio data. Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed. VIDEO CDs can hold 6 times the audio information of conventional audio CDs. [. . . ]