User manual SONY PCG-SRX99P

[. . . ] Welcome Congratulations on your purchase of this Sony VAIO® computer, and welcome to the online VAIO® Computer User Guide. This user guide provides detailed information on all aspects of using your new VAIO computer, from keyboard functions to preinstalled software applications. In the left navigation window, click the topics you want to learn more about, and that information will be displayed in this main window. Click here to find the latest updates and supplemental information about your computer. Click here to view your computer's hardware specifications and software information. Page 1 Using Your VAIO Computer This section describes the following aspects of your new computer: Using the Keyboard Using VAIO Action Setup Using the Jog Dial Control Using Memory Stick Media Using PC Cards Using Power Saving Modes Connecting a Phone Line Connecting to a LAN Connecting to a Wireless LAN Page 2 Using the Keyboard Your keyboard is very similar to a typewriter's, but your computer keyboard has additional keys that perform specific computer-related tasks. [. . . ] 6. Slide the LCD lock lever and lift the cover. Slide the keyboard toward the LCD display, then lift it away slightly. Lifting the Keyboard 7. 9. Lift the keyboard from the LCD display side. Gently turn the keyboard over the touchpad. Take care not to detach the cable when lifting the keyboard. Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity. 10. Remove the new memory module from its packaging. Install the memory module by sliding the module into the open slot. Do not touch any part of the motherboard or the other components inside the computer. Installing New Mem ory Module Page 111 13. Snap the connectors into place when the board is correctly seated. Close the computer cover and replace the three (3) fastening screws on the bottom of the computer. Page 112 Removing a Memory Module 1. Turn off the computer and all peripheral devices. Disconnect the power cord and all cables from the computer, and remove the battery. Wait for the computer to cool down. The interior of the computer becomes extremely hot during operation. Wait at least one hour for the computer to cool down before you remove the screws. Use an appropriate screwdriver to loosen and remove the three screws at the bottom of the computer. To avoid damaging the computer, do not remove or loosen any other screws. 6. Slide the LCD lock lever and lift the cover. Slide the keyboard toward the LCD display, then lift it away slightly. Lifting the Keyboard 7. 9. Lift the keyboard from the LCD display side. Gently turn the keyboard over the touchpad. Take care not to detach the cable when lifting the keyboard. Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity. 10. [. . . ] If you cannot print, try changing the printer port number. Click Start on the Windows taskbar, and then Control Panel. Click Performance and Maintenance, and then System. The System Properties dialog box appears. [. . . ]