User manual SONY PCG-XG29K

[. . . ] VAIO Notebook User Guide PCG-XG28/PCG-XG28K/PCG-XG29/PCG-XG29K Notice to Users 2000 Sony Electronics Inc. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval. PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. [. . . ] See the manual that came with your PC card for more information on use. For some PC cards, if you alternate between normal power operation and the System Suspend or System Hibernation power management modes while the card is inserted, you may find that a device connected to your system is not recognized. Restart your system to correct the problem. When the computer is on, be sure to follow the steps below, otherwise the system may not activate properly. When the computer is off, skip steps 1 to 4. 1 2 3 4 5 Click the Start button, point to Setup, and then click Control Panel. Click the name of the PC card you want to remove from the list that displays, then click Stop. When the message "You can remove the PC card" appears in the display, click OK. Press the RELEASE button to remove the PC card. Upper eject button Lower eject button Insert the PC card slot protector back into the empty slot. Using PC Cards To remove a PC card (Windows 2000 models) "! If your computer is turned off, you do not have to follow these instructions. 1 2 3 4 5 6 Double-click in the system task tray. The "Unplug or Eject hardware" dialog box appears. In the Unplug or Eject Hardware dialog box, select the appropriate option, and then click Stop. A message appears informing you that the device can now be safely removed from the system. Press the PC card RELEASE button to remove the PC card. "" VAIO Notebook User Guide Removing the optional hard drive PCGA-HDX10 Windows 98 models 1 2 3 1 2 3 4 5 6 Click the Remove multipurpose drive bay device icon on the PowerPanel. Slide the Release lever on the bottom of the unit in the direction of the arrow and hold while sliding the device out of the multipurpose drive bay. Click OK. Windows 2000 models Double-click in the system task tray. The "Unplug or Eject" dialog box appears. In the Unplug or Eject Hardware dialog box, select the appropriate device, and then click Stop. A message appears informing you that the device can now be safely removed from the system. Slide the RELEASE lever on the bottom of the computer in the direction of the arrow and then unplug the drive from the computer. the hardware device. When the computer is in System Suspend or System Hibernation mode, you cannot remove VAIO Action Setup "# VAIO Action Setup VAIO Action Setup manages the settings for your computer's Jog Dial control, internal timer, and i. LINK interface. An overview of each of these functions is provided in the next few pages. For more information on changing the settings using VAIO Action Setup, right-click the Jog Dial control icon or , in the task tray and click Help Topics. Jog Dial Control Your computer is equipped with a Jog Dial control on the right side of the unit. The Jog Dial control enables you to open an application, folder, or document from a predefined list by rotating and pressing the Jog Dial control. In addition, when you press the Jog Dial control, you can turn on your computer automatically and start the selected application or document, and if the document you select is a script file, you can execute a complex task, such as connecting to the Internet and downloading your e-mail to your computer by simply pressing the Jog Dial control. turn press Jog Dial control Using the Jog Dial Control This section explains how to use the Jog Dial control. For information on how to change the Jog Dial control's settings, right-click the Jog Dial control icon in the task tray and click Help Topics. "$ VAIO Notebook User Guide Launcher mode The Jog Dial control window is in launcher mode until a software application is launched or the Jog Dial control window becomes active. When an arrow is displayed next to an item in the Jog Dial control window, you can display a submenu of that item by selecting it and pressing the Jog Dial control button. Using Launcher mode To use the Jog Dial control, click the Jog Dial control window or the Jog Dial control icon in the task tray. [. . . ] If the additional memory is not shown, repeat steps 1-9 of "To install a memory module" on page 104. & VAIO Notebook User Guide On handling the display filter Remove the clips on the top of the display before removing the display filter as illustrated below. clips Hold the display filter by its sides to avoid leaving fingerprints on the display filter. Wipe off the fingerprints left on the display filter with the filter cleaner. You can also use commercially available cleaners. Do not use solvents such as alcohol or thinner, as they may cause damage to the surface of the display filter. [. . . ]