User manual SONY PCGA-AC19V3

[. . . ] the Sony PCGA-AC19V3 port replicator is designed for Sony notebooks. However, it may not be used with some models. *1 The specifications are the same as those for the notebook you are using. [. . . ] Use your product only with the AC adapter supplied with your notebook. Make sure that the socket outlet is easily accessible. The model number and serial number are located on the bottom of your port replicator. Record the serial number in the space provided here. Refer to the model and serial number when you call your Sony Service Center. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including any interference that may cause undesired operation. Power requirements AC adapter Operating temperature 41°F to 95°F (5°C to 35°C) (temperature gradient less than 18°F (10°C)/hour) Operating humidity 20 % to 80 % (not condensed), provided that humidity is less than 65 % at 95°F (35°C) (hygrometer reading of less than 84°F (29°C)) Storage temperature ­4°F to 140°F (­20°C to 60°C) (temperature gradient less than 18°F (10°C)/hour) Storage humidity 10 % to 90 % (not condensed), provided that humidity is less than 20 % at 140°F (60°C) (hygrometer reading of less than 95°F (35°C)) Dimensions Approx. (650 g) Supplied accessories Operating instructions (1) Design and specifications are subject to change without notice. Use the port replicator with an AC adapter that is compatible with your notebook. See also the manuals provided with your Sony notebook for more information. Make sure that the socket outlet is easily accessible. Do not place the unit in locations that are: ­ Extremely hot or cold ­ Dusty or dirty ­ Very humid ­ Vibrating ­ Subject to strong magnetic fields ­ Sandy ­ Subject to direct sunlight · Make sure that nothing metallic comes into contact with the metal parts of the unit. If this happens, a short-circuit may occur and the unit may be damaged. [. . . ] Do not operate the unit with a damaged cord. Do not operate the unit if it has been dropped or damaged. While in use, it is normal for the unit to get warm. [. . . ]