User manual SONY PCLK-LSA1

[. . . ] Enjoy easy recording from a radio onto an MD. Make the settings for each connected component from your computer. ) -- Recommended models: VAIO notebooks sold in Europe from summer 2000 (PCG-X29, PCG-F701, PCG-F707, PCG-F707K, PCG-F709, PCG-F709K, PCG-Z600NE, PCG-Z600NEK, PCG-SR1K, PCG-C1XD) and later models. LINK card) -- Free hard disc space: 10 MB or more -- Video board and display driver: VGA (640 × 480 pixels), 65, 536 colours or more -- CD-ROM drive (for software installation) s OS : Windows98 Second Edition/Windows2000 (This software does not run on Microsoft Windows3. [. . . ] Select from the list the desired language version of the on-line manual to be installed. The Digital Link Manager folder is created in the folder in which this software is installed. Click "Finish" after the window for finishing the installation procedure appears. Be sure to read the precautions which appear. If not, the software will not function properly. Because this software uses this folder, please do not erase, move, or change the contents of this folder. When you connect STR-LSA1, CDP-LSA1 or MDS-LSA1 to your computer for the first time, and the operating system on your computer is Windows2000, a message may appear requesting that you insert the supplied CD-ROM. Follow the on-screen instructions at this time. If nothing appears in the Audio Rack View when you start up the software for the first time When you start up the Digital Link Manager, the icons of the connected components will not appear in the Audio Rack View and the window shown below will appear if: · You connected the LISSA-series components to your computer before you installed the Digital Link Manager. You connected the LISSA-series components to your computer after you installed the Digital Link Manager, but you did not restart the computer. If the window appears when you are using Windows98 Second Edition 1 Disconnect all i. If the window appears when you are using Windows2000 1 Disconnect all i. LINK devices from the computer, and then reconnect only the LISSA-series components to the computer. 3 Double-click "Microsoft DV Camera and VCR", click the "Driver" tab in the "Properties" window, and then click "Update Driver" to update the driver. LINK device (xxx-LSA1)" (xxx, indicated as MDS, CDP or STR, is the model name of the LISSA-series component) in the window as the driver. You must install the Adobe Acrobat Reader in your computer in order to open the on-line manual. Carefully read the precautions which appear. If you do not want to install it, click "Cancel". [. . . ] When you start the software, the following display appears (when MD is selected as the sound source): If nothing appears in the Audio Rack View when you start up the software for the first time, see page 11. If you experience any of the following difficulties while using this software, use this troubleshooting guide to remedy the problem. Should any problem persist, consult your nearest Sony dealer. Please also refer to your computer's manual, as well as the "Readme. [. . . ]