User manual SONY PCLK-PX1

[. . . ] Record the serial number in the space provided below. Refer to this number whenever you call upon your Sony dealer regarding this product. Duplication of any or all of the contents of this software and instruction manual or lending of this software to third parties without the express permission of the copyright holder is strictly prohibited by copyright law. â· Sony cannot be held liable in any way for monetary losses, lost profits or claims from third parties arising from the use of this software. [. . . ] The actions you must take in this step varies according to the text editing software you are using. for the procedure to copy text , refer to the instruction manual for the text editing software. Click the Track Name display on the track to which you want to assign a name. Click the third track name if you entered track names as shown in (ex. The track names are pasted in the same way as they are entered with the text editing software. In the example given above, from the third track name to the eighth track name are entered in the same way as they are entered with the text editing software. If the disc's write protect tab is set to protect, you cannot record on the MD. You cannot click any icon on the Tool Bar while the Media Communicator is recording on an MD. : Record in the monaural mode*1 STEREO : Record in the stereo mode *1 The time you can record in the monaural mode is almost double the time you can record in the stereo mode. (DHC-MD555 and DHC-MD777 only) 1disc : Record on one MD ALL discs*2 : Record on two or more MDs sequentially *2 When "ALL discs" is selected, recording is automatically performed sequentially on MDs set in the stereo system if all tracks cannot be recorded on one MD. Before recording, remove any unwanted MDs to prevent recording. Note When recording with "ALL discs", follow the procedure below: 2 Select "ALL discs" in the REC MODE dialog box, and close the REC Drag the track number of a track you want to record from the Track Name display in the CD Window and drop it into the MD Window. the dropped track is shown in red in the MD Window as a candidate for recording. Repeat steps 3 and 4 if you have another track you want to record. You can also select two or more tracks at a time by clicking the desired track numbers while holding down the Ctrl key. to select all tracks in the CD as candidates , drag and drop the CD disc icon (page 19) into the MD Window. Note The dragging operation is canceled and displays the message "Insufficient free recording space" if it finds that the track you have just dropped do not fit on a single MD. If you record a CD which contains many tracks on the nearly full MD, the Media Communicator may not function properly after recording. If the CD or MD information is not displayed properly after recording, click the Reload button. If the track number or name which has been recorded is displayed in red, restart the Media Communicator. Otherwise, the Media Communicator may not function properly. Listen to the radio program you want to record using the TUNER Window (page 46). [. . . ] Press down the entry for which you want to run a timer by clicking it. the timer associated with the pressed entry is enabled. The function is played or recorded according to the settings defined in this entry when the predefined conditions are met. You cannot run a play timer and a record timer at the same time. [. . . ]