User manual SONY PCLKMN10A

[. . . ] 4-231-460-12 (1) M-crew Version 1. 05E On-line Manual PCLK-MN10A 2001 Sony Corporation · Duplication of any or all of the contents of this software and instruction manual or lending of this software to third parties without the express permission of the copyright holder is strictly prohibited by copyright law. · Sony cannot be held liable in any way for monetary losses, lost profits or claims from third parties arising from the use of this software. · Should any manufacturing defects occur, Sony's responsibility shall be limited solely to replacing said defective merchandise. · This software is approved for use only with the specified equipment. [. . . ] Click "Paste all text information" in the pop-up menu. Note Disc and track names are saved to both the MD and your computer's hard disk. If you modify the name of a track on the system stereo component, the track name may no longer match the one displayed in M-crew. To correctly display track names that have been modified on the MD, click the Reload button in the MD window (page 15). 49 Assigning track names with text data from another application You can use a text editor such as Notepad to enter track names in advance, and then use the data to assign names to all tracks in a single operation. Before you begin · Only alphanumeric characters and the symbols listed below can be used in disc and track names: !"#$%&'()*+, ­. /:;<=>?@_` All other characters will not be correctly displayed. · Disc or track names cannot be recorded or edited on a writeprotected MD. To do so, first slide the write-protect tab on the MD to enable writing. 1 Type in the track names as shown in the example below, using Notepad or other text editing software. Example Track name of the third track<ENTER> Track name of the fourth track<ENTER> Track name of the fifth track<ENTER> : Track name of the eighth track<ENTER> Copy the text and paste it to the clipboard using the editing menu of the text editing software. The copy and paste procedure may vary according to the text editing software. For details, refer to the instructions provided with the text editing software. Click the track name of the track (in the Track Name display) that you want to name. Following the example text given in step 1, click the third track. The edit mode for entering track names is activated. 2 3 50 4 Right-click to display a pop-up menu, and click "Paste. " In this example, the track names created and copied through the text editing software are entered as the track names of the third to eighth tracks. Note Disc and track names are saved to both the MD and your computer's hard disk. If you modify the name of a track on the system stereo component, the track name may no longer match the one displayed in M-crew. To correctly display track names that have been modified on the MD, click the Reload button in the MD window (page 15). 51 Performing MD operations Using disc and track name data in other applications Saving disc and track names entered in M-crew to a CSV (Comma Separated Value) formatted file allows this data to be used in database software, spreadsheets and other software. 1 2 3 4 Open the MD window (page 14). Click "Save As CSV File" in the pop-up menu. A "Save As" dialog box appears. Input a CSV file name and click "Save. " The CSV file is saved and becomes available for use in database software or spreadsheets. z Tip M-crew cannot read CSV files, but it can record disc and track names that have been created by and input from another application (page 50). 52 Adding an image to the MD Jacket display You can add one jacket image (bitmapped or JPEG file) for each disc. 1 2 Open the MD window (page 14). Drag a bitmapped image file from the Explorer and drop it onto the Jacket display. The bitmapped image will appear in the Jacket display. z Tips · The bitmapped image file that is dragged and dropped is copied to the Jacket folder (default location: C:\Program Files\M_crew\Jacket), which is located in the same folder as the M-crew application. · When the image in the Jacket folder is deleted, the image in the Jacket display will not disappear. To delete the Jacket display image, right-click the Jacket display, and then click "Initialize image. " The image file in the Jacket folder, on the other hand, is not affected when the Jacket display image is deleted. 53 Performing MD operations Recording to an MD Recording from a CD to an MD Before you begin · You cannot record to a write-protected MD. Slide the write-protect tab on the MD to enable writing. · Before you begin the recording, double-click the disc icons of all the MDs to be recorded to. [. . . ] 1 Choose from among ONCE, DAILY, and WEEKLY. Click at the right end of the "Mode" field to choose. Display ONCE DAILY WEEKLY Meaning Record once on a scheduled day of the week, at a scheduled time. Record on a scheduled day of the week, at a scheduled time, each week. 2 Set the day of the week and time at which you want the system stereo component to start recording. [. . . ]